Jump to content

VEEDUBBED

Legacy Donators
  • Content Count

    2,078
  • Joined

  • Last visited

  • Days Won

    2

Everything posted by VEEDUBBED

  1. Didn't get it mate. Still haven't found anything yet??
  2. Hi, Has your door handle got a raised circle around the lock or is it flush?
  3. Er, what the hell are you gonna do with THREE sets of gauges pops??
  4. A quick word in favour of Mark H. aka Marks2 who sold me a few spares recently. It's not often that i get impressed with the way objects are packed up and posted but This member is on a different level.. Total pro who took time to do things PROPERLY.. Thanks again mate.
  5. VEEDUBBED

    Help needed!

    I assume that the ecu vacume hose is the right lenght and connected to the correct nipple on the throttle housing? Stutters with engine hot and cold? Throttle body micro switchs been checked? CO Pot resistence been checked? 480/500 Ohm is the reading you wanna aim for. Fuel pressure been checked under engine load? Fuel pump voltage been checked under load? Is there a constant 12v at the fuel pump?
  6. Got it. I sent you another PM with a bit of history.
  7. Send me your email and i'll get you a load of photos sent. What's wrong with your engine?
  8. The only practical way i see is to try it out on another Vr engined car mate. Forgot to say, have you tried swapping the injector harness plugs between injectors? say faulty no.2 with good no. 1 injector to see if the fault is carried over to the known good injector? I had this happen yonks ago on my original g60 Digifant ecu, i changed the internal 3 leg injector driver and it was fine, never worked out what caused the driver to burn out though.
  9. Sounds like a burnt out injector driver in the ecu.. Any chance you can substitute the ecu for a good, working one?
  10. Well, i still have an ABV bottom end with only 19.000km's run.. Any good? Only problem is that i'm across the pond from you.
  11. Thanks graham for taking the time to get the photo. I'll give it a miss mate, over to Shaun. Cheers.
  12. VEEDUBBED

    ignition coil

    Post up a piccy of the connector you need, i may have one spare.
  13. Could you post a photo of the broken bit?
  14. No mate, no good ones left, Just a few split ones..
  15. I'll take the foglamp please. PM me Your details and i'll PayPal you the cash. Cheers.
  16. No I didn't, did you send it by PM? Send it directly onto my email, that way I can send you directly. [email protected]
  17. No chance.. Takes at least a week.. Would have a been ideal as I'm bed ridden with the bloody flu. As soon as it arrives I'll chime you. Cheers.
  18. Very sorry to here this, I too didn't know him personally but nevertheless my condolences to his family.
  19. I may have the two half's down in the garage, send me your email and I'll get a few photos sent. Cheers-Andrew
  20. Pops had the last one mate. Sometimes they pop up on ebay.
  21. Let me sig it out tomorrow morning mate and I'll send you a few photos. Send me your email again.
  22. Has, I've Got a spare one you can have mate. RHD so bloomin useless to me..
  23. As title chimps, has anyone ever ventured into this? I've got a sprare panel with wiring, thinking about giving it a whirl.. Cheers.
  24. First time i've ever heard of an engine stalling that was caused by the oil pump??? Surely if the engine had that low pressure one of the alarms would have chimed or am i missing something?
×
×
  • Create New...