A20 LEE
-
Content Count
1,695 -
Joined
Everything posted by A20 LEE
-
Mike_G60 Thanks for the gearbox casing :thumbleft:
-
the front or rear one? How did you support the engine if it was the rear?
-
Probably been done, but whats the worst bit of a C to clean?
A20 LEE replied to Yandards's topic in General Car Chat
subframe and steering rack :wink: -
First pic i've seen of the prototype, not as cool looking as the rendering on the cover of autocar.
-
Richard at Venom can source them too.
-
if you can change your order DO IT. They will corrode around the bolt within 12months. You'll be saving the cost of a re-polish and laquer even tho' they'll cost more to start with. Wax offers no protection as its water getting under the laquer around the bolts.
-
Warm soapy water and they will still corrode. Thats split rims for you, well laquered aluminium anyway. Best tip is order with stainless dishes, wish i had but didn't know it was an option at the time.
-
Audi handles are worth every penny, one of my favourite mods for every day use. How about mk3 or mk4 handles? Think the locking mechanism is inside the door but i'd guess they still operate with a linkage.
-
I've been pulled over five times since i started driving (two of them this august) and always found the police to be totally fair, in fact they've just ticked me off when they could have given me points and fines. Just be polite
-
got the O-ring, should the radiator have little brackets on the engine side (drivers) as shown below?. Looks like a good quality product tho'. Would have prefered the rad to be silver for a minter look through the grille but i can live with it.
-
The one which fits on the top right? Does that need replacing too?
-
picked up the radiator today from GSF £128.08. Slightly different from the factory part in that its painted black. Still got a few bits to buy, new fan motor, V-Belt and the temp switch then time to start on the oil cooling.
-
pot hole? :lol:
-
Whats the best way to disconnect the central locking to my drivers door? The battery went flat and couldn't open the car!! Fortunately i usually leave the bonnet unlatched. Smooth cars :roll:
-
sorry, my fault. Are boost guages mechanical :roll:
-
I'd say TT seats too if you don't want to go to the expense of fitting Recaro's and want a seat that looks factory. There pics of a pair of TT seats on forum in a C and they look great. That said if your going for a leather dash your probably prepaired to go the extra mile so track down a set of factory recaro subframes and you can bolt in the vast majorite of recaro seats. I got my SR's new but watch ebay and look out for honda Type R Recaro's.
-
Are guages mechanical?
-
so its egt vs oil pressure. Think oil pressure is a little more important, what do you think?
-
on the right lines, your thinking of sasha's car. That had a boost guage in the rev counter i think.
-
g-mans 4 door corrado... :wink: alive again (update13/11/05)
A20 LEE replied to W3RKD's topic in Members Gallery
looks really striking. -
yeah, i'll read up on the exhaust gas temperature and see how important it is. Water temp guage is std equipment. Basically I need 2 guages (one of which is boost) other undecided hence this post. The air-fuel is lumination and is a series of ten or so LEDs in a line.
-
I bet we have to wait a while til we find out :lol: Only till i've done them.
-
Which other guage do i need to buy in addition to a boost gauge and an air-fuel mix gauge? Your going to love how i plan to mount these!!
-
I don't believe for one minute that you haven't bolted a pair on already to see what they look like!! :lol:
-
think Paul Kippax's car is magic black.