skid

Now that's very nice 😊

Might have a Genuine 50k one for sale later this year but its a G60.

Thanks VeeeDubbed, i think i should be ok for headlight and slam panel but still need a wing.

Can you supply a close up of the bubbling?

A good tip before you apply anything new is to give it a good clean with some mild APC (All purpose cleaner)to remove all previous products as sometimes they dont mix well and you dont get the correct finish of the new product. Autosmart G101 is a good APC. You could buy cheap and get some from any supermarket.

Poorboys natural look. http://www.polishedbliss.co.uk/acatalog/poorboys-natural-look-dressing.html

Very nice. Whats the crack with the shelf section under the glove box?

I was wondering if you could tell just looking at the slam panel esp if its off the car. But i just found this and its shows in the pics. http://the-corrado.net/showthread.php?70129-What-is-the-difference-between-VR6-slam-panel-(lock-carrier)-and-other-models

Is there anyway i can tell just looking at the slam panel esp if its off the car?

Are the front slam panels different between models and years? I need one for my 95 VR6 and see a few early ones for sale but for different models and don't know if they will fit?

Did you manage to get a price Tom?

Thanks Tom. AB23 8QJ postcode.

Thanks guys. As I live in Aberdeen, Scotland I would need things delivered. Of course I would cover costs if you could include in price plz.

Looking for passenger wing, headlight and slam panel for my 1995 flash red VR6. Anyone got anything?

It's not just the heat it's how long it takes to heat up that's frustrating

They look very close together when they are at the rest position. They dont hit each other do they?

I have heated seats which were fitted as new in the VR6 but they take forever to heat up. Can anything be checked or done to improve this?

How can you check the sensor or wiring? I have no reading on my MFA, nothing at all! No dashes nothing! could it be my MFA is fault. The sensor is plugged in, and it's not plugged into the wrong plug either. Thanks for any info.

http://www.adrad.co.uk/prices/aircon_prices.php?type=autoair&id=16-3478&engine=&model=CORRADO&make=VOLKSWAGEN&cat=Condensers&from=1991&to=1995&rowid=352175 Is your part number the same as this James?

That's a good find James. Have you ordered one?

Fender vag, thanks for that. was yours a direct replacement? As I read so much about radiators from places like GSF Eurocarparts etc needing mods or brackets made up! Because vw can supply an orginal one and no one can source a condenser rad for my air con I am thinking about putting both in to a local company who will repair them. Had a look yesterday and only looks like it's only a pin hole on the top of the rad.might even try and repair that myself with some resin, but will see how the Core is once in there

So whats the main difference between the coolant radiators? Do the cars with Air con have a different size Radiator? Also are the air con radiator/condenser available off the shelf or do they have to be made up, or get the existing one repaired?

Just found a leak on my 95 vr6 coolant radiator, so obviously I need to replace it but which one should I buy? The car has Air con too,but the air con rad/condenser is also needing replaced too but I can't find one. Any ideas and pointers greatly appreciated.

Ah, i did voltage check with out the lights being connected and was getting 11.5v with battery sitting at 12.5v I will have to rig it up again with the lights connected and on.

Thanks for the reply Zak. I have a new replacement loom sitting about that i bought about 10 years ago for my G60 raddo. I didn't need it as the loom was already upgraded. I don't know if that loom is suitable for my VR6 95 model, but if i do remember rightly the loom i had needed heaps of work to fit it. I might be better just buying a new loom from you :) What voltage come through as standard to the bulbs and what comes through with the new loom fitted?