Fat Tony

27 Got the car when I was 25 Dont mention insurance :mad:

Not been on the forum in a while you did PM but its been even longer since I've been in my mail box. See you on the 30th

The discount was my next question. Need to get a set at the end of the month. Cheers

Joe M, Hey Joe did you use crow road VW or another one?

steveo29, learn a new thing every day :lol: . If this gauge gives up (hmmm life time warrenty) Maybe sick it on ebay(was told this after i bought hindsight eh..). Is there any other way of spotting timing is out other than idle?

dubster82, Cheers Brian, When is the RR day? Is it a club day?

146 Jockey, As I said got them from the group buy but here are the prices from amd VW Corrado VR6 UK RHD (10 coolant hoses) - £226 VW Corrado VR6 US Spec LHD (9 coolant hoses) - £200 VW G60 Mk3 Golf/Corrado 09/90~ (4 supercharger hoses) - £118 VW G60 Mk3 Golf/Corrado LHD 09/90~ (7 coolant hoses) - £172 Got them as mine where looking a bit tired and heard to many stories about people cooking there heads etc etc and being stranded at the side of road

Bally, Was the rolling road day for the scottish Region dan, Cheers for that chris CORRADO, Got them from a group buy on the egroup these guys get a good write up http://www.auto-amd.com/samcohoses.asp

Samco's

very nice set of wheels you have there to many nice touches to mention quality C !!! 8)

Whats the connection between timing issues and vac? :shock:

Ok off to the halfords with me then. Will take a look and see if I can find the tube first so as I get a good match. leigh, My boost guage only reads boost. its pretty cool stores the highest boost on your journey which is all I'm really intrested in (charger health). I asked in the past what is the point in the vacume reading but nobody gave a good reason. So I'm with you on that one boost only thanks

Thanks Gazza I currently have it running off that one that is capped if I'm following you. I assume the panel you are talking about is the one under the steering wheel or is it the shelves. What size of T piece (diameter) or where do you get these. Cheers

Hi Guy's I've fitted the above but I'm a little worried about my plumbing. Can someone send me a pic of how they have done this as I need something to avoid the pipe melting. Also what would happen if this pipe leaked whilst driving I'm using fuel pipe tubing (a few psi I'm lead to belive) so it should cope just worried about the connection. I think it has something to do with the breaking but not sure (very poor when it comes to mechanical stuff I'm afraid) Thanks

Bodyshop in Glasgow Vehicle Repair Centre 220 West Street Glasgow G58LG 041 429 5644 Ask for Stuart

OK here we go: Vehicle Repair Centre 220 West Street Glasgow G58LG 041 429 5644 Ask for Stuart

http://corrado.atx-hosting.co.uk/viewto ... hlight=tam Will add the details in here as well. Good Garage and 4 wheel alignemnt if you need it

I work at Sky Park if you want to see the work. I could post you some pics send me your email address. To be honest I could send you 100 you could never tell with a camera. The tube station is West Street so just over the kingston bridge I will get the number for you when I'm in the office. You could walk 20 yards and you would be in his workshop. They do MOTs etc as well.

Hi I just had some work done on my car there is a body shop just around the corner from the Kingston Car Wash. Ask for Stuart. I can get the name and number if you wish. It is just up from the ESSO garage and across the road from the Tube station. Cant remember which one. They done a spot on Job. If you want you can have a look at what they done on mine. It needs a wash. HTH

I bought both, LHD from the US said it would fit didnt returned it and cost me 40 bucks in postage :mad: Then got two RHD ones as I waited so long for the UK dealers to produce them Sold the other one on the forum for a fiver Cheers

HANS They are definately different as I got one from the US the guy said will fit no problems BS*(& But they still stock them for LHD http://www.neuspeed.com/catalog/6Lighti ... terior.pdf goto page 8 vdo section. Postage is a bit high thou

I have a K&N panel filter and they are crap IMO done nothing for me and I dropped a few bhp on the rollers after fitting. I know there are a lot of influencing factors but I wouldn't notice if you swapped my paper one back in. 2p

New gear box I would guess. Or drop in a VR engine lol

I use the Zymol stuff and its the dogs bol...... 2p

OK I bought one of these: http://store.summitracing.com/partdetai ... D%2DM9017G Only problem is it would appear not to show the vac readings. An after thought but I still don’t know what this would indicate in terms of problems. Wanted something slightly different. They let you know your max reading on a blip (stores the info) so this may save me staring at the thing when I'm driving hard bonus!!! :D Now I asked the guy to let me know everything I need so I bought a boost sender unit and thought I would get the T piece and the relevant hose to connect to it. Not the case. Not impressed everything I seem to buy mail order gets screwed up. Suppose I should ask more questions :mad: I've not really looked into these fitting kits as they can’t be that hard to source. So if anyone knows if you could let me know that would be great. I would like to know how to fit this. I.e. where is the hose that gives the ecu the reading is there a best place to cut this and add the hose. Also where have you mounted the sender unit? Engine bay? Inside the car?.... Pics would be handy :) Fitting instructions would be great if anyone has them from there kit. Does anyone knows where to get a plain black panel to house the gauge. I already have the console one so thinking about maybe locating somewhere else. Thanks in advance. P.S. Brian I think I'm going to try to mount else where as it seem that the group buy isn't going to well. Maybe when everyone buys there gauges it will be a good time to run this.