G60 CS

I have a G60 rear axle you can have for the cost of the postage & a beer, paisley freight would prob be around £25/30

what would you do the auto throttlebody, engine without turbo and charger, toothed pulley setup & oil pump ?

how much extra would this have given your G60 ? mine sounds like a similar spec

im after outer seat trims and endcaps the plastic bits that cover the runners the seats silde into

Hi I was refitting my clocks yesterday and went to refit the vacuum pipe to the back of the cluster, gave it a gentle tug and it came right off ! I was left with a 8" length of rubber pipe with a 12" length piece of hard vacuum pipe pushed into it. Its pretty difficult to see in behind there so can anyone tell me where this pipe goes to ? Is it the inlet manifold ? I'll need to replace it asap as it seems to affect the running of my G60

I have one that came as part of a BBM 16vG60 integration kit I imported a few years ago. I have put 600 miles on it when I was running in my last engine so its in as new condition want 500 for it

Cheers John, plastic box already bought ;) best go and get some electrical contact spray then

Saw a nice white G60 in Exeter about a week ago, parked up near the college was a very nice example of a standard car

I'm having some issues with my headlights since getting the car back from having some work done. My sidelights work OK but no main and high beam, I've checked the fuses 1, 2 10 &11 which appear to be good. I do have an uprated headlight loom fitted with 2 fused relays, the fuses here are OK, the relays themselves are not housed in anything and have a little corrosion around a couple of the terminals, but a test light still shows power running thro them , any ideas ? MOT booked for Sat and the lights are the last (hopefully) problem.

Hi do these fit all Corrado's ? Got a part number I can check ?

what's the bottom half like ? I'm planning to chop the bottom half (cubby hole bit) and try and graft it onto the bottom of an early type

Hi looking for a late type centre console am planning to cut the bottom half off for a project so doesn't matter if it has any damage

ive got a staggered set of Borbet A's for sale 16" 4x100 9j rears 7.5j fronts .................

Hi I have a set of Staggered Borbet A's for sale 9J rears and 7.5J fronts PCD 4 x 100 The ET of the fronts is 35 The ET of the rears tbc as they are currently in storage come with spigot rings and nut type centre caps and legal tyres The rears have been professionally fully polished but could do with buffing up The fronts have a polished lip & silver painted centre I'm looking for £400 as they are, or £625 professionally refurbished to your specification ie painted polished or powder coated am based in Exeter, Devon would prefer collection but can courier anywhere at your cost Pics to follow ...........

No the Lysholms not for sale but I do have a standard charger that was part of a BBM 16VG60 kit I imported from BBM i used it for the first 600 miles running in my new engine then switched to my Jabba stage 4, The Lysholms for my MK1 G60 conversion

So what do people think ? I'm running a Jabba stage 4 charger, toothed pulley kit, redtops, BBM fuel rail, 3bar fuel reg, SNS stage 5 chip, Pro Alloy FMIC kit, 4 branch & a K&N panel filter. Soon i will be going to a 1.9 bottom end and a big valve head

Whats left for sale bud, oh and by teh way i have the syncro stuff u need ;)

cheers Ste will do

Want a staggered set of Borbet A's to replace them ?

awesome pic to [email protected] or txt to 07812343411 how much are you looking for ? am out and about collecting some wheels early eve so able to collect anytime that suits thanks Simon

Anyone got a set of all red rears they want to sell ? cheers

Hi i have a set of staggered Borbet A's, 9j rears 7.5 j fronts 16" 4x100 fitment

I thought it might be useful to start a thread to help people get round the problem of obsolete parts, mods feel free to move this if its in the wrong section or if one exists already ! I have a 92 G60 and have recently had issues with various parts failing that are obsolete, so after a bit of surfing I've come across a few companies that others might find useful: 1. Power Steering Pump : http://www.power-steering.co.uk/ 2. Brake Master Cylinder: http://www.biggred.co.uk/ 3. Clutch Master Cylinder: http://www.pastparts.co.uk/ 4. Windscreen Wiper Linkage: http://www.wipex.co.uk/ 5. Coolant Outlet Coverplate (also 16vG60 integration brackets etc) : http://wp-spezialteile.de/shop/de/index

earth cable from bonnet to body, wiper linkage, heater matrix, clutch master and coolant outlet on the side of the block :( What a week !! so found someone who can supply the bushes on the wiper linkage and can make me a new arm if required as its obsolete now, found a company to re manufacture my clutch master as that's obsolete too. Found a guy in Germany that makes the coolant outlet cover plate again obsolete part. had to buy a new block as mine was too corroded from the coolant leak just need the obsolete O ring now !! Soon be back on the road !!