TimDoc

forgot to look for the screw on bits, how many do you need, i seem to remember it was around 4 all together? Tim ---------- Post added at 06:37 PM ---------- Previous post was at 06:35 PM ---------- shelf support pics are at http://photobucket.com/breakingvr6corrado Tim

Thanks matt - did you use a jigsaw with metal blade or a disc cutter?? Wipers etc posted today by the dear wife! Should be with you soon. Tim

Another window here if that one falls through! PM me if interested - have both sides available for anyone else reading this! Tim

Rob, that sounds fine, prob best to draw onto a picture of a corrado and put minimum measurements away from the arch so i can be as accurate as possible. Its not going to be done this week tho as still have to drain the fuel etc. Maybe get it done early next week. Would you want the panel then to be posted?? It might come to quite a lot! But i can look into that. PM'd you with further contact details to help with communications! Tim

the wipers etc are all ready to post, just saw your post from yesterday and held off as was going to add all together! Would you like the wipers and scuttles now and the rest later?? Tim

I do, but they have been trimmed in new leather. They prob wouldnt match a normally trimmed one, these look cool, but need a little re-gluing around the edges. Metal clips for the parcel shelf nobbins are still intact, however one of the plastic bits inside the metal clips is gone. Pics on photobucket link from my signature. They currently have pioneer speakers fitted that work really well - im not big on my speakers - they play the music nicely! :0 Without speakers for £20 for the pair (no extra postage) With speakers for £30 for the pair (no extra postage) Tim ---------- Post added at 10:59 PM ---------- Previous post was at 10:42 PM ---------- I also have some bare plastic ones sitting in the top of my bin - could look and see how they are if you wanted to trim some yourself. Tim

where u based rob?? Tim

No rust in sight - had a really good look and cant see any blemishes or bubbles - so its a goer if you're keen - will try and get on with the petrol tonight so the tank is empty. No dings in sight either - guessing you are going to strip it back to bare metal anyway so the painwork shouldnt be an issue. Tim

Chazrad - no worries about the straps! £15 for the strip and i'll get it wrapped up and posted in the next couple of days. PM'd

sold

Pretty sure that all the rear arches are good - will scrutinise tomorrow evening and let you exactly how they look. If all is ok then £50 for whatever you cut away? Can sort out an angle grinder for u! Want to get the petrol tank off before we start cutting tho as there is still a full tank load in there and that wouldnt be so good! Tim

£ 50 posted

sunroof mechanism sold window motors sold T

PM'd

Yep - DBP colour panel in really good nick - £50 OVNO plus postage/collection Tim

I do indeed, still have both - sunroof mechanism rebuilt with replacement parts and regreased around 3 yrs ago, tilts and slides with no problems, advertised price of £80, motor for £20 - works fine and has the windback allen key attached still, drivers wing has had an injury behind the arch around 5 months ago, have filled the dent and smoothed but not perfect, would need finishing - has been done properly to date tho with all sanded back to bare metal. Advertised at £50. I think I may have overpriced these items slightly. I am assuming that you don't need the sunroof panel? Lets say £80 plus postage for the mechanism and motor, £40 for the wing plus postage but i would suggest collection as these will come to quite a lot. Tim

vr6 slam panel in dark burgandy pearl located in bath, see breaking thread below. Tim

still looking - i have one in bath/tidworth that can be posted for £40

I have one from a 93 vr - will that work - i know the change over was around that time. Check out my breaking thread. Tim

Late wings and bonnet, based in bath, look on my breaking thread. Wings 50 each OVNO, bonnet 200 as in really good condition, DBP is the colour. Tim

I have the bottom end and cams also - based in bath, cylinders 1 and 6 are suspicious of mild ovaling, and surface rust of course! Otherwise ok. £90 collected? Cams for £20. Tim

think i have the cowling trim - will check - if so £10 posted? Tim

I have 6 - £10 each posted, used, removed as breaking car.

VR6 radiator collected from bath - used but only for around 1.5 years, removed as breaking £50 collected - emailing you. T

Have one that will need a dent repair finishing - look in my breaking thread. T