TimDoc

Taken above Salcombe, whilst catching some rays and waiting for mates to turn up for a lush weekend of camping 2 yrs ago. A few things have changed on the car since then, but still like the pic

lol - was originally looking at the posting on the old i-phone, just looked at the pics on the computer and it is a diff colour to mine - lol - mine is the DBP. iPhones are good - but evidently not that good! Apologies for unnecessary debate! :ignore: :ignore: T

I'll happily be told I am wrong but the colour of your car looks the same as mine which I am told is dark burgandy pearl????? T

Yep in the air and they stopped when I put my foot on them, manual transmission, just checking this is normal

Had the car up on stands sirtin out rot under the front end, checking everything ran ok once all put bck in etc and started the car in neutral, and the wheels started turning, checked the stick - defo in neutral - is that mean to happen or is that bad?? T

are they cheapo clamps?? all ss so should be fine, let me know what your thinking T

you have to buy the whole thing unless you can find one at a breakers T

Sorting out the rust and found lots of little things to do. The intake manifold vaccum sensor (i think it is) hose is a 3-4mm (internal diameter) that is a braided black rubber hose - see pic below, has frayed lots so replacing - is 4mm fuel line ok as a replacement?? - have fitted one end and its fine for fitment? Old New These rusty bolts - guessing they hold the head onto the block i'm guessing, they look in pretty poor nick - if not doing anything down there i guess you just leave well alone? Which coolant should i use - got 3/4 of a bottle left from last time that i got from gsf that has pink fluid in it - but all the writing is in german - that may be a good thing!!?? The bottle that i have ringed in the picture - guessing that this is the powersteering fluid - whats the best and how much is needed?? Appreciate all help and advice Tim

Vr6 gearbox oil change, how much oil and what's the best to use??

Whilst I have the front end off - what else should i do?? I've got the crossmember and the rad mount off and cleaned them back to shiny metal, primed them ready for painting and will be coating them with rust-oleum and then anti-chip paint. The crackpipe is to be replaced as the oil cooler nozzle has snapped off (whilst i was sorting a bypass pipe). The radiator and the fan cowling have come off, been taken to pieces and the cowling de-rusted, primed and hammerite'd. The battery tray has had all rust removed and been primed ready for some hard wearing paint - prob the anti chip stuff. Looking at the front of the engine, its all a little rusty but not flaking - does this need anything doing?? The started motor (i think it is) looks really rusty and a pipe below it also - doe these need cleaning off or anything else doing to them. Have got lots of time on my hands so will be working on this for the next 2 weeks. Pics below Appreciate any advice/suggestions Before de-rusting After.. The battery plate The fans The car as it stands The starter motor??

but then u need a compressor too :nono: which i dont have! will pick up some of this stuff and paint it on - looks like homebase do it as a rattle can anyway! T

new post

KADVR6 - any chance of some pics to show condition, does the "subframe" include both the piece that the front engine mount is attached to and the piece that the rad sits on?? T

Does the sump have enough strength to take that much weight? Also does anything else need releasing before you lift the engine off it's front mount? Guessing the removal of the front subframe is achieved by removing the bolt between the other two you undo to remove the bumper? T

can the engine be jacked up and the subframe removed without lifting the engine out completely? Just need to get the radiator mounting bit off but leave the front engine mount in situ. T

Got the front off the car to get some maintainence cleaning and sorting and to fit an oil cooler. Found a lot of rot on the front subframe (the bit that the rad sits on). The ends of it are almost flaking through, and the middle isnt that strong. Gonna try and source a second hand one. The front engine mount is integrated into this part. Is there any easy way of getting this off to clean it up/replace it without hoisting the engine. Can you jacj up the front of the engine? Any experience and advice would be helpfull. Thanks T

is your headlight switch a little rickety?? if so, when they are about to break, they short the 12v power that goes through the system down the little earth wire that is there to earth the circuits for the leds in the switch, this then cant take the current and melts, letting of (from other peoples descriptions) differing amounts of smoke sometimes v smelly and acrid. Check the lights are working and pull the switch out and check none of the wires in the loom are burnt through. T

HIC brokered me a deal with Trinity Lane insurance, agreed value of £6500, pay £20 per year to have it re-assessed and have to send in pics etc. Found it difficult to get a better deal with anyone else. T

Think the bit with the lights in is called the slam panel over here. Numpty bus driver! Hope you get this sorted T

http://www.the-corrado.net/.archive/forum/viewtopic.php?f=19&t=61911

Try this: http://www.corrado.com.pl/elektryka/corrado94.pdf tim

Gonna be fitting one of these in the next week - anyone fancy taking some pics to show how it should and shouldnt be done?? Not to sure by the description above. T

any idea what who and where?? And how much does this improve things?? T

Has anyone ever cut open the inlet manifold and smoothed/polished it all - worth doing?? Tim

The cat back system is £359. That's their website price and what they quoted to me over the phone. I think the boss is American and lives out there most of the time, and the gist I got was that he's a bit of a twat (wasn't there when I was!). He has a web link to a camera in the workshop so be can check up on them! Sounds like a great guy to work for. Sounds like if you managed to catch this guy you might've got an uninterested ear! Not really surprised that if you were having a new cat fitted the price doubled. Phone again and see how it goes! T