millerman
-
Content Count
840 -
Joined
Everything posted by millerman
-
here is the magnex stainless oval pipe
-
i can highly recomend the ebay sx5 loom its easy to fit and does the job well
-
i have a 1 series m sport diesel and its a great car fast handles well and cant fault it drove the audi a3 equivelent and although nice it was not a touch on the bmw i am looking at the 330d msport coupe as my next daily drive !
-
get some new ones from vw there not expensive thats what i did
-
nothing wrong with clear lights personal preference if everyone was the same it would be a boring world !!!
-
im not sure all the above is strictly true i run a £350 set of boston acoustics in the doors (std size) and their component tweeters in the stock positions dynamat (or cheeper alternative roofing flashing just as good) behind the door speakers and the sound is very good punchy and crisp . im not saying larger speakers wont improve this of course they will but for a stock look inside you cant beat my set up
-
£500 i think you will find but still a lot of money for wax !!!!
-
fair play mate always wreck your mates car b4 your own !!! :D :D :D
-
sorry but not my cup of tea either !!
-
i also have this mine is where the window is slightly off line when the window shuts its not inside the rubber on the door pillar next to the back side window i will get around to fixing it one day :brickwall:
-
i had this a few years back and basicly it the resin around the coil pack failing it only takes a tiny crack and it will arch all over the place i dried mine out put more resin over it and it was ok again untill it rained or was damp and then would miss fire again so ordered a new one and no more problems
-
i like the red one i think the wheels make it look far better think i will have to see one in the flesh to make my mind up now!
-
you cant !! its a sealed unit !you can get new glass lenses you have to cut the glass off with a knife around the seal and replace that way
-
my effort for motivation
-
BLIMEY :gag: they really do look the same both horrible the wheels are not right for it either as said its just not really a nice looking car is it !
-
you can get holograms from applying too much wax and not buffing it away correctly if you cant get it machined (best way as herisites says) try a quick detailer or megs stage 1 cleaner and then use super resin polish to hide swirls and then wax but remember to apply any way thinly or you could find it hard to remove and get the holograms back again !!
-
i use the Miracle Dryer - Ultra Plush from cleanyourcar.co.uk the towel is massive and drys the car really well and being ultra plush does not add the swirls better tham any chamois just whilest wet spray a small amount of quick detailer on the wet surface your drying and away you go megs towels tend to go hard after a few washes so mine gets used for alloys i wanted to get the sonus de wunder towels but did not have any so i tried the miracle dryer and stuck with it
-
ha ha been saying that since march when i decided to get mine back on the road after 2 years still have not got around to getting the mot but have done most of the work to it gonna try and get the mot next week :D cant wait to drive my VR again
-
i would imagine that you would need to wet sand it back past the infected area and then fill it then prime and try and blow it in the clear coat then i would wet sand using 4000 abralon pads and then compund and then polish thats what i would do anyway buy that time you may as well have done the whole wing :D
-
got my paint from paints4u.com very good match
-
i guess polished flat bits and red inner bits ??
-
for sure its not an easy bit to describe :D :lol: :lol:
-
i have not got them on mine but i beleve you can get xenon or bi xenon hids the bi ones being hi and low but if your running inpros unless you have moded them you dont need bi xenon as they go out on high beam
-
:D sorry but only a girl could describe the intake manifold like this :D it just made me laugh as that is something my other half would say trying to describe a part on my corrado. again sorry im really not taking the pi$$ just made me :lol: :lol: :lol:
-
i think its h4 for std lights and h7 for inpros !