winchbietch

As above, looking for a good vr6 alternator. - (not concerned on amp spec) Quiet - no bearing noise and in good working order. Thanks Paul

Thats a common issue.. If you remove your alternator - no need to disconnect wiring - (will reach and rest it on top of engine) undo bolts and remove the " p gasket " bracket assembly you can get a pair of mole grips on each of them and undo.. High chance you will need to file / block sand the ally housing before refitment too as is will be pitted.. Blow away with airline if poss any coolant so bone dry or sealant / gasket can weep on reasembly The material "p gasket" (older version) is better than the metal type for slight corrosion sealing faces.. A liberal amount of hylomar on all faces. Put back together.. Lightly coat the 3 replacement bolts in copper slip.. A dob of threadloc on all bolts. Paul

I was in my rado but about 5 cars back in stationery traffic at the oundle roundabout heading into Peterborough.

Saw a grey m plate heading into oundle just before 12 today.

I tried powerflex bushes when i refurbed my axle and found them too solid. On hard cornering when pushing on b roads it felt like the rear of the car wanted to break traction with the road.. Replaced them with Superpro ones and love the transformation. They are made from different grade material throughout the bush so gives firmness and compliance.. Lifetime warranty too if im not mistaken..

Il take the badge mate.. Can you pm me your details and i will send funds.. Paul

Manifold received Thanks again

Parts received. Thanks again

Thanks Fla. Iceviolet can you pm me your details and I will send funds. Paul

Badge received.. Bulletproof wrapping [emoji106]

Interested in the exhaust manifold if the sale falls through..

Package received.. Thanks mate.

Cool, can you pm me your details and I will send funds..

Interested in the battery bag. How much posted mate? Paul

Top man. [emoji106]

Payment sent.

Payment sent.

Oh ok. on my setup i kept the fan setup obd1 and controller only converting the engine to obd2.

So other than the aux water pump it was fully working in situ?

Yeah thats cool Rams. Pm me ur details and il send funds..

Il take the badge mate. Pm me your details and i will paypal you funds.. Paul

Any chance of getting it cheaper after my bargain obd2 fan controller setup i sold you? Paul.

Hi rams. Interested in a spare loom. Is it both parts - ie fuse box side - engine loom? How much posted to Peterborough mate?

Standard did the job and stopped well with the abs but with your foot down pushing on hard on b roads i boiled the brake fluid on a few occasions racing a mate in his 156 alfa. 288's stopped much better but the brake pedal feel never inspired too much confidence. The brembo's with euro spec rears are just awesome.. Best mod ive done to date..

Went for these a month back- good bit of kit..