volksworld13

if this helps i have one wheel g60 alloy?

bump. offering free postage this month.

hi i need a passenger side rear boot strut, and the front radiator cover support that the cover screws to. please pm me with prices posted, thanks

i have a drivers window i can do cheap.

i will have a set please to do my car, i take it one set you get 4 rollers,:) for both front windows?

hi i need the nsr boot prop, and the radiator trim support plastic that the panel screws onto. price posted please.

hi fella rad support metal work that the rad sits in ,/, ideally rust /damgae free. price posted? vr6 gearbox! mileage and condition, cruncy gears,noise ect, price posted? vr6 starter motor condition price posted? center console trim that houses the radio,controls? condition price posted ? heater controls condition? price posted?

hi fella mileage and condition of gearbox? price posted? radiator support panel front of car that bolts up to the front cross member, condition price posted? heater controls condition? price posted? center console that holds radion and controls, condition price posted please? thanks. ps is the car being broken in devon?

hi i need a rad support metal work that the rad sits in ,/, ideally rust /damgae free. price posted? vr6 gearbox! mileage and condition, cruncy gears,noise ect, price posted? vr6 starter motor condition price posted? center console trim that houses the radio,controls? condition price posted ? heater controls condition? price posted?

thanks chaps! glad your happy!

hi just found out that all corrado with abs have the same brake lines which means i can do lines for the following models, vr6,2.016v,g60 !

ok start from the basics. do you have a spark at the plug, you check this by removing the spark plug and rest it on the head with the lead connected, turn the engine over, see if you have a spark. do you have an aftermarket alarm or immobiliser fitted? silly question are you low on fuel? whats the guage reading, you could have a faulty fuel guage, another check is on the fuel rail there is a valve, if you turn the ignition on, the pump should prime and there should be fuel under pressure, if you get a screwdriver and depress the valve does fuel squirt out?

i had the same issue, a body shop attempted this, and said they would cut the hindge off and re-weld it back on, and the cost would not be worth doing so i left it, i did try all sorts myself, door off, punch hammer press, gave up in the end!

hi rod, do you still have a good head availble, i dont want a head that has been skimmed ,and its known to be in good working order. thanks alex

tell me about it!! doh ---------- Post added at 09:57 AM ---------- Previous post was at 09:54 AM ---------- hi i just need the head complete with cams and thats it. i dont want a head that has been skimmed already, has this head had any work done? how much posted to tr96bx, cheers

hi everyone im in need of a good kr cylinder head for my corrado, as the head is warped/cracked, im on a budget so cheap as poss please, and i will need it posting, thanks in advance alex

is this going ahead, as i need a timing set, and just wondered if we are doing a group buy?

hi pm received, and replied ,cheers

bump im offering both front brake lines for the vr6 for 60 quid posted. as im seeing a bit more demand, for mot faliures.

all engine will have pressure in the cooling system when running,this pressure allows the coolant not to boil i.e raises its boiling point, if the engine is overheating and coolant guage is high,and the header tank pressures rises alot and coolant boiles over this would indicate headgasket, head fault. seems like normal operation to me, when the engine is cold there will be slight pressure in the header tank.

still looking for a clutch flexi /pipe that goes on the slave cylinder cash waiting.

corrado nugget 1.8 16v cornwall here!

i also have a bumper late, £10 bit out your way though

hi people i need a bit of help , im on a budget so need cheap as poss. need a clutch pipe which is the flexi part from the pipe to slave, it has a coiled pipe bit in it, for a 1990 kr, but im sure they are all the same. and also my headlamps are soo dim, need a headlamp loom kit with relays, dip and main. let me know what you got. thanks in advance alex

i also have one , i can send it asap if your desperate.alex