stu37

Hi guys I have decided mid project to have a sort of some parts that are no longer required and decided to put them up for sale. (Photo's to follow shortly) G23 Wheel Adapters 5x120 to 4x100 x 4 18mm thick all round. These are an exceptional set of adapters in excellent condition and not to be confused with the cheap Chinese eBay rubbish. £200 posted. Apex 35-40mm lowering springs for a VR6 (brand new and unused) sadly the box deteriorated when left outside in the rain by an idiot courier (SOLD) 2 x rear adjustable Koni dampers, in used but serviceable condition in full working order with no corrosion to the dampers. (SOLD) Full Cat Back Miltek Exhaust System for a Corrado VR6, in used but great condition. With nicely polished boxes and no nasty dents or marks. (SOLD) Also I have a complete 2.9 VR6 engine which is imminantly about to be pulled from my own car as part of my turbo project, the engine has been well maintained and runs sweetly with quiet chains and top end (unlike some) currently on 141k from an unmolested car. I intend for the engine to come complete with inlet/tb/loom but minus alternator/flywheel and clutch. £600 Any questions please ask guys. Any serious enquiries please drop me a message/ text or call to 07859238100. Based in Cardiff South Wales.

Hi guys I am looking for an ARP rod bolt and head stud kit for a 12v VR6, does anyone have some they might consider selling? Cheers guys.

Hi would be very interested in these. Please drop me a message if your able to, 07859238100

Hi guys, does anyone have a set of lowering springs hiding in the shed for a VR6?

Hi guys, I am looking for black late door cards front and rear, and a set of coilovers (not Jom nom nom's:) If you have all or part of the above please drop me a message. Stu

Hello if this is still for sale I am pretty local and would be happy to collect. If you could drop me a message on 07859238100 that would be great.

Hi guys I am looking for a pair of late wings and doors, do not mind colour or overall condition and happy if doors are without any gubbins. Just not major rust please. If you guys have any sitting in your garage please drop me a pm. 07859238100

Hello mate is the car still available I have had little joy with sending a PM or emailing, if you could please drop me a line on 07859238100 that would be great.

Hoping too, selling it was one of the biggest regrets I have had!

Quickest find ever one car found!!!

Hi guys just putting a feeler out to see if anyone knows the where abouts of Dragon Green VR6 Corrado L608 PRP...??? I think it was last owned by a lad called Ben from Portsmouth? If anyone knows of the car please let me know as I would like first refusal if she ever comes back up for sale. Cheers guys. 07859238100

Z Engineering ZR1 Charger Spares or Repair...... Hi Guys, I have for sale a Z Engineering ZR1 Charger that was bought by myself some time ago to go with one of my VR6 projects, as time has dragged on I literally do not have the time or the car to do this any justice :(. I have for sale a stripped down ZR1 Z Engineering charger completely stripped and in need of a rebuild. I purchased the charger in this condition and as such selling it as spares or repairs. All the parts appear to be in place, pulley wheels, belts etc... (No Aux belt tensioner). The impeller is in excellent condition as is the housing. I will upload photo's later today. Any questions please ask. 07859238100 List Date: 6/30/2014 For more info, click here to view the original listing: Z Engineering ZR1 Charger Spares or Repair...... -------------------------------------- On Sale For: ?259.50 -------------------------------------- Mobile friendly version: Z Engineering ZR1 Charger Spares or Repair...... Go Mobile: Download the free Panjo iOS app now!

Hi guys, Recently with the increasingly warm weather I have noticed that the car has started to get really hot (Corrado VR6). I have had a good read of the cooling guide and been able to test the fan speeds. (Stage 1) All OK (Stage 2) DEAD AS A DODO. (Stage 3) All OK. (Afterun) All OK. knowing that the second stage of the fan relies upon the fan controller and the rad switch, both have been replaced with no change. No wires appear to broken and wonder if it could be the brushes in the fan? I have been scratching my head for some time and cannot think of any other logical problems... I have even considered trying to find a lower rated temp sensor (Normally to trigger fan speed 3) to trigger it nearer that of fan speed 2. The operation of fan speed 1 (when running not testing) only triggers for no more then 10 seconds before powering down and after a few moments operating again. Any thought would be much appreciatted!!!

Hello mate do you still have the inlet manifold for sale?

Hi guys just a quick one to ask if anyone has a standard 2.9 upper inlet manifold (ideally not polished) that they would like to sell? Any information guys please drop me a line. 07859238100

Hi guys just a quick feeler to see if anyone on here has first hand experience of rebuilding a z engineering ZR1. The internet is hardly brimming with info but just looking to see if anyone has done this and what they may have experienced? My charger is in superb condition apart from ageing .I would not mind replacing the bearings and seals before they let go. Before it comes apart I just wondered if anyone had found suppliers for things such as the bearings and O rings and what the spec may be? Any help would be most appreciated, I hope to put together a breakdown when mine comes apart to help others in the same situation :).

Hi guys here we have for sale a boxed BMC in the 85-150 size. It comes boxed with all of the fittings are spare stickers etc.. It has been fitted to my VR for about 6 months and has been one of the best purchases I have ever made as the sound it produces is unbelievable :). The kit itself is in excellent condition and is a must have for someone's bay!!! £100 + postage. Any questions guys drop me a message as I'm often busy and away from the computer. 07859238100

Does anyone have one of these? :(

Hi guys I am looking for a rear passenger Cream C pillar cover. If you have one please let me know. Many thanks. Stu 07859238100

Lol easily missed :)