DEL VR6

the guy at Halford insisted on me using hammerite red paint. little tin that cost £5.49p any one got any pics of a set thats been done in this?

thats what im talking about. will have a butchers later. Was the paint like a halfords own brand? i've seen a few products for this kind of job. some are two part, some are one and some u spray on. :?

Have done a search for this and not found the info / advice i need. Am about to fit my 312's soon and want to paint the calipers red. (Yes i know some might say if you want them to look like Brembos, buy brembos etc etc but thats another story really) Before i do it, i want to make sure i do it right to get the perfect finish. Want to get that high gloss finish that looks nice and thick. (Like porsches!) Has anyone done it already? / got any pictures / advice on what products are good / bad / to avoid etc. Thanks in advance.

Same!

re the EL wire... you hard wire it to the back of the ciggy lighter, so it all still works as normal. click this if it helps as i have just done it. anything you wanna know, give us a shout. http://the-corrado.net/.archive/forum/viewtopic. ... highlight=

bummer! thats bad news. hope everything gets sorted for you and glad you are ok.

how you doin Zippy? Are you going to the summer scorcher? It wasnt really that much of a mission. I left the cable extra long on the back so that you can pull it all through and still have the panel "loose" so to speak. The earth cable was obviously straight forward, and the live was just a thin wire going to the ciggy lighter terminal thing, so not really all that much of a mission.

:lol: :lol: :lol: (Way too many childish lines to list in response to that comment) Seriously tho, thanks. I got it from a seller on eBay ages ago. I really should have gone for the red, but just liked the cool blue alot better, and thankfully the head unit has a blue/red combination so i have just about got away with it, otherwise it would have looked really out of place.

I used the superglue stuff that came with it, and bought some epoxy resin and literally glued about an inch at a time. Waited for it to dry solid, then the next inch and so on. Thats why it took soooo long to do, cos of the waiting in between. Hard wired it in to the rear of the lighter socket. You need to cut small parts of the plastic off from the heater control near to the corners when you offer the cover thing back onto it.

lovely motah. nice stance on the wheels too.

Jay, you can spend anywhere upwards of £15 a wheel for this sort of job. Over the years i've had quite a few done by all different outfits. The best job i have seen to date is the one i am having done right now for my 1303 Beetle wheels. They are costing me £25 per wheel. Will post up a before and after of the job, cos its absolutely show standard. (bare in mind this is a friend of a friend who is just doing it in his spare time at work where he has the facilities to get the job done to the right standard) Some places quoted me £55 per wheel for my Borbets which were pretty battered when i bought them. I actually only paid £20 per wheel about 24 months ago, and they are still just about ok. (Some lacquer issues here and there) I would say that you dont need to spend £55 per wheel that alot of the more "Marketed" companies charge. Just find a good honest garage or someone with some experience with this kind of thing and around a £100 for the set will get you the right job. All the places i use are in Leicester, so a bit far for you i suppose?

I just have a couple of things outstanding to do now (lighter ring and dials), but apart from them, all the switches and controls in the car are now red. The hardest LED swap was the sunroof switch and the mirror controls. The only thing that isnt red is the gear knob, but that fortunately matches the stereo so its all red with a bit of blue.

Following on from this article in Wiki, just thought i'd post up the pictures of the mod i did recently incase it helps anyone thinking of doing the same thing. Took longer than i thought it would take, but am well pleased with the results. Anyone about to do it, PM me if you want any tips / pointers etc.

Totally. I dont think my dealers would even know what i was driving if drove up there in my Karmann Ghia. I was speaking to a salesman from VW cos my wife wants a new golf, and when he asked what i drive i mentioned the C and the Karmann Ghia. When i said a VR6 Corrado, he nodded and said "Ah, yes, the VR6 Corrado.... thats the one with the G60 engine in it, isnt it?"..... He didn't even know what the Karmann Ghia was.

thats horrible. we had this happen to us many years ago at Donington, when our MKII RS2000 was broken into and all the nice bits were stolen. That must be heart breaking.

apart from this corrado forum, i tend to be hovering aroung Volkszone or VZi (Same thing) alot of the time. Really its more for aircooled, although it does have a H20 section, but i hardly ever go in there.

mine need doing too. Am about to fit 312's so reckon will get them rear pipes all done at the same time in one hit.

blimey 3.10am! Welcome to the forum mate. Lets see some pics too.

I ordered mine from that model millennium place a while back, and it arrived the other day. Am well impressed. Detail / scale is spot on. Especially impressed with the spoiler, the logos on the foot mats and the engine detail. Oh, yeah the exhaust tip looks like my Magnex too! Its all very impressive. Only thing i didnt like were the silver rubbing strips on the edges. How did you get them off 3corsameal? Thinners? Would love to find a set of 1:18 6 spoke wheels to look my Borbet C's.

Lovely looking car. Got any plans for it?

Great! :roll: Even more nobheads to gorm at your Corrado, then try and burn you off at the lights. Then they wonder why you didnt put your foot down and wait for you further up! There must be one in every town. 4 lads. All look too young to drive. All got the same sort of caps on (wonky or backwards or something), and licking lolly pops, and doing that gun signal with their hands.

Saw this on VZi the other day too. I agree that it's great what he's done, and i know what what a mission it is prepare a car for concours. I just cant help thinking that its only an Astra every time i see it.

50k is a good mileage, and if it aint been messed around with its a good find, especially as its got leather too.

I know what you are saying. Mine were crap before i swapped them over. It feels like you were the last person to know about "the other side" I've had mine ages now and they still work like the first day.

thats just mental!