flusted
-
Content Count
2,755 -
Joined
Everything posted by flusted
-
yep straight swap
-
Jubilees can cut into the pipe where the vws 1s dont
-
lOOKING GOOD
-
thats seperate from the engine loom, and the pressures wouldnt matter.
-
yes, i have a slimline aftermarket fan and ive joined the 2 speeds together
-
Early golfs only had the single speed, so are you saying theres a wire missing? should only be 3 spades on the fan, earth, slow speed, and fast speed
-
loom is plug n play, engine should bolt straight in, although i wouldnt want to use the abf mangement if it were me
-
search forums, you should get a good stage 4 1 for about £500 with reciepts, new 1s are about £1600!
-
looks like the small belt has snapped?
-
Can i just point out the van and escort i built when i was 17 which was 12 years ago :ignore:
-
finally hard eveidence good work Jezza, maybe that should be wiki'd?
-
thts more a PAS cover, im using a golf mk3 one
-
Prepare to laugh Then the many changes to the rado Also had another camper,a jetta, a metro turbo and a beetle on hydraulics but sadly no pics
-
so your fitting a KR? why not keep the 9A? im confused. Best to run 9A with KR cams and 9A management if thats what you already have fitted
-
The engines are identical if you have a kr and 9a, just use whatever management your car runs on the replacement engine then its straight swap
-
Upon a bit of research i found these seats are from a very rare lancia intergrale evo dealers edition and approx value of £600! not bad for a straight swap for some golf seats i was given. They were in a white mk2 my mate bought from the mainland. I got some electric recaro subframes from Bigtartanjudge (cheers mate for great service) Leccy frame on left, bodged up mk2 frame on right Just got to wire up the loom and fit them in
-
surely panel filters are made of exactly the same stuff as cones though? prob even same surface area?
-
:lol:
-
surely a headgasket change should only cost about £250?
-
thw water would never make it up there as the snorkel is also removed from the box so doesnt suck up that tube
-
http://www.the-corrado.net/.archive/forum/viewto ... AI#p833687
-
How to swap passat handle pins for Corrado handle pins?
flusted replied to C. Will Corrado G60 2's topic in Exterior
why not just use passat latches? -
g60 discs are 2mm wider and the g60 caliper is 2mm wider to accomadate this. You can grind 2mm off the slider bolt heads and use your existing 16v calipers
-
Quick Question: What the hell is a 'breather box'?
flusted replied to MonkeyVR6's topic in Engine Bay
isnt it like £100 from vw but £20 quid from ford or something stupid like that? -
I have a KR inlet cam For £30 delivered and a 50mm inlet £50 delivered