eddy.h 0 Posted January 30, 2011 replaced the os window regulator one week with no door panel got on my :censored:ing nerves water leak again new flange on the said of the head & a g-werks solid tensioner need to make some spacers for it :grin: Quote Share this post Link to post Share on other sites
Jim 2 Posted January 30, 2011 Fitted a BMC induction kit to the VR on Saturday. Took it out for a few thrashes and subsequently removed it again today. Very entertaining I must admit - did have a huge grin on my face. But just a bit too loud and "look at me" to be honest! I must be getting old or something! Quote Share this post Link to post Share on other sites
__Andy__ 0 Posted January 30, 2011 attempted to clean the valver for the first time in 7 months, gave up after washing off two wheels and went out for a ride on the road bike instead.. Quote Share this post Link to post Share on other sites
Jon_vr6 1 Posted January 30, 2011 Fitted a BMC induction kit to the VR on Saturday. Took it out for a few thrashes and subsequently removed it again today. Very entertaining I must admit - did have a huge grin on my face. But just a bit too loud and "look at me" to be honest! I must be getting old or something! Did it have the cold air feed on it mate, as they are a bit louder with it off?? Quote Share this post Link to post Share on other sites
Jim 2 Posted January 30, 2011 Didn't put the cold air feed on yet as I just wanted to give it a try, and wasn't sure on routing and cutting the pipe - I have a lack of tools for this kind of job! :( Quote Share this post Link to post Share on other sites
Jon_vr6 1 Posted January 30, 2011 http://www.the-corrado.net/.archive/forum/download/file.php?id=45181&mode=view This is how mine looks just angled towards the standard air stream through the headlight, definitely try it with the cold air feed pipe on as its does quieten it down a bit Quote Share this post Link to post Share on other sites
domwells27 0 Posted January 30, 2011 Fitted an updated headlight loom and the difference is just. Dipped beam is now brighter than main beam, think I should have got a 2 relay version! Quote Share this post Link to post Share on other sites
krnau 0 Posted January 30, 2011 little progress. speed and rpm done (incl. needles). mfa done, but needles pending (need 2 leds!!) I hope it'll be finished by tomorrow :D DSCN8072.JPG[/attachment:3nlauiwy] Quote Share this post Link to post Share on other sites
Critical_Mass 10 Posted January 30, 2011 That looks sweet mate, hope you're going to do a how to :D ;) Quote Share this post Link to post Share on other sites
krnau 0 Posted January 30, 2011 That looks sweet mate, hope you're going to do a how to :D ;) sure! Just need to finish it before. the total amount spent doen't exceed 30Pounds including backlight and needles :) RPM dial sits a little to the right, I mean, it's not really centered but I can do nothing about it now :( I'll get myself some leds and try to finish it tomorrow :) Quote Share this post Link to post Share on other sites
robrado974 1 Posted January 30, 2011 langers came round today , and we got the sunroof sorted :clap: . i hate the bleedin thing its caused me so much grief ,so glad ive got another job ticked off the list . edit thanks to matt vr for lending me the bently manual without this i would have struggled and nath for help with the motor synching Quote Share this post Link to post Share on other sites
Critical_Mass 10 Posted January 30, 2011 Good stuff, wouldnt mind giving this a go with my VR clocks, they need brightening up. How come the needle doesnt sit on its original spindle? Let me know when you've got it all sorted and a how to going :D Quote Share this post Link to post Share on other sites
Wompa 0 Posted January 31, 2011 Cleaned and preped the engine and calipers :clap: Before: After: And the calipers! Quote Share this post Link to post Share on other sites
krnau 0 Posted February 1, 2011 Good stuff, wouldnt mind giving this a go with my VR clocks, they need brightening up. How come the needle doesnt sit on its original spindle? Let me know when you've got it all sorted and a how to going :D it was just to test illumination. now it sits right :D MFA needles look crap. It'll take longer than I thought at first :( Quote Share this post Link to post Share on other sites
dragon green 5 Posted February 1, 2011 Swapped my spoiler control over to a later one, now it goes up at 56mph instead of 45 mph, after ten years of watching it rise at 45,it`s going to take some getting used to ! :shock: Quote Share this post Link to post Share on other sites
rado2 0 Posted February 1, 2011 Put the standard airbox back on looks loads better Quote Share this post Link to post Share on other sites
krnau 0 Posted February 1, 2011 wires, wires everywhere! climatronic wiring-Golf from May 01.pdfDSCN8079.JPG[/attachment:11esqgiw] much tidier now 2.8l 24v Climatronic system.pdfDSCN8083.JPG[/attachment:11esqgiw] win!!! (excuse the ultra-dirty screen LoL) DSCN8095.JPG[/attachment:11esqgiw] Quote Share this post Link to post Share on other sites
Dan_Storm 0 Posted February 12, 2011 (edited) Got my tax disc today after having the C SORN'd for the last couple of months (it was tucked up nice and dry in the garage). Gave everything a quick check over and it fired up and ran perfectly. Went for a drive in it which was great. It made me realise how nice it is to drive. Looking forward to getting it tidied-up for Summer. I have got loads of tidying up to do on the interior following the matrix replacement last year. Edited February 12, 2011 by Dan_Storm Quote Share this post Link to post Share on other sites
rado2 0 Posted February 13, 2011 Put new steering wheel on finished wiring up iluminated gear knob so its on a switched live instead of just with the lights on and gave a quick polish. Sorry about pics phone camera. Quote Share this post Link to post Share on other sites
VR6Pete 0 Posted February 15, 2011 She now has a good shine :) Quote Share this post Link to post Share on other sites
mjcp 0 Posted February 16, 2011 Went to Rugby and back to see a client, 100 miles each way, 35.4mpg there, 33.6mpg back... Picked up a set of Estorils with 4 good tyres on the way home too! Marc Quote Share this post Link to post Share on other sites
lauraJ 0 Posted February 16, 2011 Uprated wiring loom fitted at the weekend!! I can now see things in the dark! Amazing Quote Share this post Link to post Share on other sites
Laser Mark 0 Posted February 18, 2011 Fitted my tank straps which have been powder coated, and fitted the exhaust. Which was a bit of a nightmare as I forgot to fit the bracket so had to take it back off! Thought I'd have a go and fire it up. Managed it in the end but the battery is fubar. Can anyone tell me how much I should expect to pay for a new one? Cheers Quote Share this post Link to post Share on other sites
leeeeshad 0 Posted February 19, 2011 Fitted my tank straps which have been powder coated, and fitted the exhaust. Which was a bit of a nightmare as I forgot to fit the bracket so had to take it back off! Thought I'd have a go and fire it up. Managed it in the end but the battery is fubar. Can anyone tell me how much I should expect to pay for a new one? Cheers I think I paid £45-55 for my halfords calcium one last year, that was with a trade card though. Quote Share this post Link to post Share on other sites
CazzaVR 0 Posted February 21, 2011 Changed the coolant hose that goes from under the expansion tank to the aux water pump/stat housing. Pretty painless really. Also replaced the bracket for my BMC as the other one had sheared off. Quote Share this post Link to post Share on other sites
