Jump to content
sexybourbon

Redbourbons vr6 With extra grunt :)

Recommended Posts

The cylinder head on mine keeps reacting for no reason, it was sprayed with brake cleaner and then wire wheels and it just bubbles up every time! I'm hoping its hidden because I don't think I can do it again!

Share this post


Link to post
Share on other sites

Really sucks doesent it lol one step forward three steps back

 

I used the same paint on the head as you so dont know why it would do that maybe use some thinners to degrease maybe ?

Share this post


Link to post
Share on other sites

Maybe give it a wash and scrub over with apc then rinse with fresh water. I did my block with vht enamel and it went on fine.

Share this post


Link to post
Share on other sites

I might have some aluminium high temp paint in the garage that I did my head and gearbox with if its any good to you Matt?

Share this post


Link to post
Share on other sites

Iv done mine sean its phil thats having the problem with the paint , cheers chris iv got loads of vht stuff in the garage already though from doing all my bits ! Need a drive shaft puller or something though if you have that , either that or the incredible hulk !!

Share this post


Link to post
Share on other sites

Cheers kev , finally got round to boxing my throttle body up for the guy who ports them so that should be here next weekend aswell im looking forward to seeing if that makes a difference and the gearbox is of to stealth on the 14th for vince to drop in the final drive :)

Share this post


Link to post
Share on other sites

Few bits more on the car , dropped the gear box off at stealth last saturday so that will be ready to pick up on the rolling road day ( looking forward to rr day ) vince is putting in the 3.68 final drive and new bearings

The throttle body has been sent off to be ported 2mm and a larger butterfly fitted

Been rewrapping the looms in the engine bay as there well manky and i also decided to paint the chassis legs as tbh they had more rust than i thought and scraches !!

So all wax was removed and them i removed any rust and recovered it with an overpaintable sealer and then etched everything else before applying the yellow high build and then the dragon green and laquer

Pics are always best

[ATTACH]80927[/ATTACH]

[ATTACH]80928[/ATTACH]

[ATTACH]80929[/ATTACH]

Other side

[ATTACH]80930[/ATTACH]

Proper manky this side it was

[ATTACH]80931[/ATTACH]

[ATTACH]80932[/ATTACH]

[ATTACH]80933[/ATTACH]

[ATTACH]80934[/ATTACH]

 

Still needs the green on as i ran out of paint so will do that friday

 

Also managed to fit the rear bumper and take the exhaust of ready for the techtonics system onces its been made up

Share this post


Link to post
Share on other sites

Haha Chris, one summer having a play, then pulling it all back out again! :rolleyes: :lol:

 

Stop stalling Matt, get that lump back in and get it back on the road!

Share this post


Link to post
Share on other sites

Haha chris is jealous of my sleek Sexy legs

 

Engine will be built this weekend sean iv been away so only on the car at weekends , but only have the looms to wrap and that chassis leg to paint up and then the engine can go back in

Share this post


Link to post
Share on other sites

Looking good Matt, is that fizzy tins or from a gun? decent job either way! I think your gonna beat me back to the road ;)

Share this post


Link to post
Share on other sites

Ta phil , fizzy cans haha never heard that one ! But yes they are mate and i dunno im not trying to beat you haha promise , although not rushing i really do want it back on the road

Share this post


Link to post
Share on other sites
Haha Chris, one summer having a play, then pulling it all back out again! :rolleyes: :lol:

 

Stop stalling Matt, get that lump back in and get it back on the road!

 

Nah this time I'll just get cracking in winter. Need my moneys worth out of it now!

Share this post


Link to post
Share on other sites
Yeah he has been sending provocative pics on my phone :)

 

Haha dont tell everyone for god sake

 

Cheers hairy ill be hopefully finishing off the bay on friday as it looks like iv got the day off wich is very helpfull

Share this post


Link to post
Share on other sites

Ok so lots is happening and ill try to keep it up to date

 

Iv finished off the engine bay now , i sprayed both sides and iv now re wrapped all the engine bay looms and cleaned the full back of the bay

How about a before and after ?

[ATTACH]81077[/ATTACH]

Really really manky

 

[ATTACH]81078[/ATTACH]

Much better and really pleased

 

New expansion chamber and jodie did a cracking job of cleaning up the washer bottle :)

Also cleaned all the power steering and put the new battery back in

[ATTACH]81079[/ATTACH]

 

On the engine side of things iv owe a massive massive thanks to chris fuzz and chris vaghag for the weekend we built the engine and i couldnt have done it without them both so thanks so much

The engine was stripped

New mk4 head gasket

Fully rebuilt head

New ina lifters

Schrick 268's cams

Full new chains and tensioners with mk4 springy bolt and mk4 bananna rail thing

Some pics from a belting weekend and some that sums up the sense of humer haha

[ATTACH]81081[/ATTACH]

[ATTACH]81082[/ATTACH]

[ATTACH]81083[/ATTACH]

[ATTACH]81084[/ATTACH]

[ATTACH]81085[/ATTACH]

[ATTACH]81086[/ATTACH]

Fuzzys vr6 timing chain bling

[ATTACH]81087[/ATTACH]

New in fashion

 

[ATTACH]81088[/ATTACH]

Lightend flywheel and a new sachs clutch went on aswell with a new release arm and bearing

Thanks again boys was a great weekend

 

 

Picked the gearbox up from stealth with the new final drive in and my mt90 oil has turned up

All mates up nice

[ATTACH]81080[/ATTACH]

 

[ATTACH]81089[/ATTACH]

Attached the spals to the rad and had the rad pressure checked and all is good

 

Finally got the engine back in and on its mounts

Drive shafts are done up and manifold is back on

Power steering is connected up

Rocker is on just need to change the gasket for the right one

Gearbox is connected up

Lower manifold is on so all is good

 

Some new single point audi tt spark plugs are on order for weekend and my exhaust is ready to pic up so will post some picks of that at weekend

 

Rather large update i know but its finally getting there

 

Redborbet of the forum over and out

Share this post


Link to post
Share on other sites

That photo will stay with me for life it always makes me giigle like a little girl

 

Sean they deffo carried me ! Couldnt have done it without them

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...