_Matt_

Cheers Mat, i've just watched a youtube vid by the HumbleMechanic on the OBDeleven and was wondering if it would work for me - so cheers for the heads up :) Matt

Thanks guys. I need to now find a suitable scanning tool, I think i just want to read codes and not worried about changing settings. More research to do!

Hi, I found my scanning port under the gear leaver but I was expecting to see the 2x2 port. I've instead got the 16 pin OBD port instead. The car is a 95 VR6 - does this mean the car is OBD2? What's the difference between the ports/OBD types? I am looking to buy a scanning tool so unsure if this makes any difference to the tool i buy. My other car is a '13 Seat Exeo 170 which i would also like to be able to use the tool for too. Cheers, Matt

Hey all, I have the original Sony headunit with the cassette deck. It works fine with a cassette and goes on and off with ignition as expected. But the radio doesn’t work at all. No fizzing noise just silent. Where shall I start my checks - any usual problems in this area? Cheers Matt

Thanks wompa. I like the height at the back - it looks slightly higher vs the B12 kit on Edds actually. I have seen a full H&R cup kit which is 40mm all round for less than 400 quid which would suit me if the front was a little higher. What’s the ride like on yours? Cheers Matt

Edd that is great. There isn’t much in it both options work really really well. I’m keeping my speedlines so it would look v similar. Hmmm.

I would say go for it and 3 weeks ago I was in a similar position. For 15 years I'd wanted something special and Corrado VR6 was always on my list, but having a family/marriage and buying houses always took priority. Now also seems to be good time to buy a Corrado if you believe the hype of them going up in value. I'm gutted I missed out on the BMW e30s and remember when nice 325i Sports were circa £3k for a nice one - now look at them! Matt

Cheers guys that's good to know. It had me a little stumped.

Cheers Hasan, it's really the rear that sits up too high (imo) - is it even possible to get the lowercups for the rear. I don't know much about them to be honest but can't help but think a suspension kit with dampers tuned to suit spring length is better.

I am still flitting around on what to do. I think pictures of B12 and H&R setups will help :) Before and after would be good! Sometimes I think I should just leave it standard and replace with a set of Bilstein B4 OEM spring height shocks. My front shock is only leaking a little and MOT not due until August so I have some time. I will be changing my suspension in some shape for form as I've bought new top mounts and bumpstops all round. I have searched for this but most of the threads are old and the pictures have gone/photobucket hosting error. Cheers

Hi, Just replacing my PCV valve as the casing is ripped and I was just wondering what the connecting piece with the part number 021103687 is for. I have attached a picture, it is the grey part. When connected to the car it has a wiring terminal plugged into it but as far as I can see there is no electrical contact points on the part - What is the point of it?! Cheers Matt[ATTACH=CONFIG]91909[/ATTACH][ATTACH=CONFIG]91912[/ATTACH]

Cheers - is it worth cleaning electrical contacts with Electrical Contact cleaner (the stuff in a aerosol can)?

Oh yes I remember reading your reply on one of the posts - the relay running hotter if I recall. This is something else to investigate - but first I need to find them. I've only had the car 3 weeks but love to tinker :)

Hi all, I've noticed my VR is more difficult to start when warmed up. When cold and left for days it cranks a 2/3 times and fires up. After a longer drive it doesn't start so easily and I instinctively give it a bit of throttle to get it going. I've read on here that it is a bit of quirk of the VR and also read about checking the FPR and blue coolant sensor. How do I check these? My mechanic put his VAG-COM on it last week but nothing was listed. Cheers Matt

I've now fitted the 2 x Evolva's in the back of my car and they're a perfect fit.

That’s good to hear Jim! You’re probably right and I used to more modern (and less interesting!) cars these days.

Following with interest - in terms of the rear where do you guys jack when working on the suspension - guess the rear axle would be no good? Cheers

My mechanic remarked my car felt a little lumpy when warm after he gave it a once over last week (I’ve only had it for a few weeks and hadn’t really noticed). We did spot the PCV pipe was split (Part No: 7M0 128 101) and I’ve ordered a replacement but yet to receive and fit. This is our first line of investigation as the car is showing no fault codes. An air leak would give symptoms of rough running though so maybe you have something similar. I find my car can be a little snatchy on the throttle – i.e when coming off or on of the throttle while cruising it doesn’t feel smooth but then at other times it’s fine. I don’t get exactly the same symptoms as yours but thought it was similar enough to post my experiences so far.

Thanks and cheers for the pics and part numbers to illustrate - that's great! Yes Green is different but does look quite nice even though not OEM. I'm keen on OEM (+) too. Matt

I like the look of these H&R springs - checked out your gallery/thread fendervg. Thanks from the heads up on the spring cups Cressa - I've seen these in my research, I take it I need to source a couple of them from gsf/tps and replace what's on my car to no ill effect? Next question... what's the differece between ABE and Typ 53i? For exmaple I'm looking at these two options for the VR6 on this website for HR springs http://www.europerformance.co.uk/pages/products/category_results.mhtml?category=hrsprings;car=vwcorrado;manufacturer=hr;sub_category=1 Thanks! Matt

Thanks for the Info :) Some more searching seems to suggest blestein B6 and some suitable 20-30mm springs (suggestions and pics much appreciated). I’m reading the B6s are dampers suitable for standard to up to -30mm spring drops which is the sort of thing I am after. I want to retain comfort and not too low.

Cheers fellas. All good then and I suppose the rust is just what happens after 23 years of getting wet and use!

Thanks makes sense. Just looking to get the rust repaired so wanted to make sure I wasn’t missing anything, such as the seals in my coatings. Cheers Matt

Hi, I’m doing my research on suspension options as I need to replace the front shocks on my 95 VR6. I like the OEM plus look and want my car to sit a little lower. I have been considering the B12 kit but after reading people having loads of issues with the rear springs it’s put me off. I basically want my car to sit similar to an early VR6. Can I achieve this by just buying early style springs? Why are the later cars sitting higher than the first? Feel free to post pics of corrados on speedlines with modest drops :) Cheers Matt

When it rains I get a small pool of water on the door sill (visible when you open the door). Would this be the window scraper seal that needs replacing as it doesn’t sit flush with the door frames when doors are closed? I’ve got a bit of rust there on both sides because of it. Thanks