Jon_vr6

If its for an agreed value then insurance will ask you for pics mate

http://www.the-corrado.net/showthread.php?50902-Sunroof-switch-problems&highlight=sunroof+%2Bclose

1H0 121 321 C - Locking cover £7.60 exc VAT

Yeah auto express apparently did some sort of comparison with the three of them ive yet to find a copy of the magazine though

They do look good

You also need a leather steering wheel

Sounds fee-sable, wonder why they changed the housing on the later golf vr's, was there a problem with the older ones or was it just because it was cheaper hmm

Hats off Dave and Co that looks great

Top job again RW1, thats the exact filter i have which i thought would be the same one that is on the storm, So i need the other one then or i have to change the filter housing so the 562 one fits ---------- Post added at 06:51 PM ---------- Previous post was at 06:46 PM ---------- So what did the 021 115 561B oil filter one come off as the A and B is the only difference in the part number? ---------- Post added at 07:02 PM ---------- Previous post was at 06:51 PM ---------- Just searched ebay and here is a golf vr6 OBD2 oil filter housing with the same type oil filter plastic as mine with the plastic sleeve in the middle http://cgi.ebay.co.uk/VW-GOLF-MK3-VR6-OIL-FILTER-HOUSING-OBD2-AAA-/220782295042?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item3367a67802 ---------- Post added at 07:22 PM ---------- Previous post was at 07:02 PM ---------- Looks like i have a late golf VR housing on mine so i have the plastic type oil filter and not the metal one oh well must be a previous owners doing. Ill get hold of proper genuine corrado filter housing and save it for next time and change that over

The one i need has the larger hole on the end of it so it can slot over the plastic guide sleeve thing which is part of the housing so which one do i need ??

Whats got me puzzled though is the box says 021 115 562 and the filter that came in the box is 021 115 561A and made by Hengst Anyone got a picture of 021 115 562 the correct one ??

Went to replace the oil filter on my car armed with what i thought was the correct oil filter and turns out mine is totally different Heres a pic of my housing mine sort of slots into a plastic type thing which is part of the filter housing The part number i got off the filter that was in it was 021 115 561B http://www.fallastarmedia.com/vortex/oilchange/large/029.jpg Is it because its a storm it got and OBD2 type housing??

What about fuel filter ?

When i upgraded the VR to 288mm's the goodridge hoses didnt have any on so luckily for me my 288's came with a set of hoses which i had to cut the rubber connector part off. Easy enough to get over the hose

Fingers crossed for an easy fix fella

As far as i can remember mate its just a rubber O-Ring part number is 535 121 687 but as said don't know if it can be bought seperatley according to ETKA its size is 31 X 3.2. Be very careful undoing the bolts on the elbow though mate

Looking good mate where are you in south manchester ?? Im in Cheadle Hulme

This happened on the GF's VR it looked like the seal needed replacing, it wasn't until we tried to remove the bolts that hold the top elbow in place that we noticed a crack down the side of the radiator in the plastic. The bolts were just spinning around so had to buy a new radiator which came with the top elbow already in place. Hope you have better luck Jon

Just ordered some oil cheers Jon

Easy fix mate good to see you solved it

:rofl:

Thats them matey just checked the part number now and thats it

Ill have a look for you tomorrow fella you should be able to read what bulb it is off the one you have on your car at the minute

I got them from RS components mate so maybe you can get them through them you have to order 20 odd though but you can do what i did and sell the spare ones on

Strange one then check fuses 16 and 21 anyway as they are the two which control the abs light rules them out then