Jon_vr6

Heres a pic of mine on this thread http://www.the-corrado.net/.archive/forum/viewtopic.php?f=1&t=65211 You get the same bhp with or without the cold air feed but you get a louder noise without 8)

someone likes shiney things i think lol!!

Many thanks to B5VWC steering wheel in top condition mate thanks

If you dont mind me asking how much did the garage charge you to fit the suspension mate its so i can get an idea of how much i should be paying for them to be fitted??

Knocking is usually bushes! same is happening to mine at the minute been on the ramps and its a anti roll bar drop link bush so obviously you have to replace the whole drop link 27 quid each from VW! My opinion get it on some ramps first

Depending on price im interested could even put a small storm badge where the ddi badge is??

Mine arrived yesterday too many thanks guys!

Whats that bottom ball joint?? Ive been told my ball joints are ok! Do i still need new ones? Also how many bolts hold the wishbone on?

Hi as the title ive been told my anti roll bar drop link is causing the knocking noise when going over bumps so going to replace both sides anyone know the part numbers needed? Also while im at it i was going to get some new wishbones fitted as the mechanic said that the bushes are worn so rather than getting new bushes ive been told to replace the whole wishbone as the bushes are an arse to get out so part nu,bers for both sides of these as well please? Also is it worth replacing the bolts etc while im at it or should the old ones be fine ?? Many thanks :salute: Jon PS I presume VW is the best place to get the parts rather than gsf?

It varys marginaly between 90-105 deg!

Thats excellant work im sure there will be loads of interest!

Right recieved an email from TOP Gear stockport and they have said i can buy the suspension separetly but for them to fit it its going to be 250 quid instead of 151 quid because they discount the fitting if you purchase with them So with them supplying and fitting £840 With me supplying £600 + £250 = £850 So does any one know a place around the north west area that can fit suspension for a fraction lower than 250 quid?

So about 45mm all round what are you going for Vornwend?? So suspension kit and front top mounts and bearings thats all that needs replacing really?

Ive PM'd chazrad asking where to get the bonrath top mounts from will look into R TEC 600 quid seems good! Do the top mounts come with the bearings? You dont happen to have the part numbers for the top mounts do you? Also are you replacing anything else ? Bushes? Cheers

Right i want kw varient 1's for my VR wheres the best place to get them from as the specialist near me want 840 quid for supply and fit? Also what else should be replaced at the same time top mounts ??

i know the decision is between kw varient 1's or the cheaper option some fk highsports or along those lines!

Thanks bud!!

Before stanford hall and the refurbed alloys!!

Ive done the front brake lines mate they were easy enough to do just make sure you have an extra pair of hands. I saw some decent kits off ebay with the pipe bender etc not sure if it will be long enough pipe though.

will be fitting mine next weekend hopefully so will be able to get you a few photos of it on the car etc!!

1. Are the fans coming on? 2. Have you checked your yellow temp sensor?? 3. Are you losing any coolant?

As above recieved mine too from Kurzy may have a go at the weekend looks very well made

Get it sorted before it goes completly mate. My GF's cv joint went completly and left us stranded!

Just got the wheels refurbed today and all i can say is they look rather nice!! Glad i went back to the standard solitudes! Pics to follow when the weather clears up.

Do you not fail MOT's when you tint the reverse lights or do you just change the bulbs??