owen g60

Boost return mod fitted last night Close up on the charger (stage 4 atm) ISV BREATHER FILTER After having terrible wheel wobble i had a look at my top mounts OLD ONE just slightly broken:bonk: What it should look like

Late heated leather interior DDI dials Moved the boost gauge... was zip tied to the A pillar A few trim peices need tidying/replacing but an gradually mounting them all up to do in one big hit

After having it for a couple of months i have decided to finally put up a thread on the G60. A few exterior shots Back end needs some work to remove the rusr behind the rear panel and at the bottom of the arches... other than that not a spec anywhere that i could find

found one... spliced into the feed for the invertor for the DDI dials

i bought a load of allen bolts, nuts and various sized washers as i was fed up with the screws pulling out.... needless to say it no longer comes off but has taken the front bumper with it a few times

I want want to change my boost gauge from an dial type on to a digital one. I need to find which wire goes live when the ignition is on and car is running as i dont want the gauge on all the time... It would be easiest to do this from the ignition itself any suggestion of which wire to use and what colour(s) it is Regards, Owen EDIT: Its a 1992 G60 that im fitting it to

my top peice is cracked too... am trying to replace it

Hi guys, I require the plastic trim piece that runs across the top of the drivers door card I believe it is part number: 535868503A 01C I need it in satin black It is part 17 in the picture [ATTACH=CONFIG]48860[/ATTACH]

I'll take tims one £6 posted??

Pm me your email and I'll pay via paypal this evening.

i do believe they will fit either side.... i require one for the driver side... but i do believe they are universal as ETKA only lists one part for both lamps

I am after the grey plastic cover that goes on the back of the front foglight... i broke mine whilst refitting my bumper. Part number: 535941605 It is part 12 in the picture, has the cables(part 15) running through it. [ATTACH=CONFIG]48822[/ATTACH] Hope someone can help. Regards, Owen

cant say ive noticed any difference really... apart from to my wallet.... yours is possibly the same colour as mine too.... as the missus swore she saw me outside our flat when i was still at work

im in branksome... havent seen any in the poole/bournemouth area... 4 or 5 16V's and about 10 VR's in the area that i have seen quite a bit

part number: 1H0412319B [ATTACH=CONFIG]48802[/ATTACH] looks very similar to this anybody have one knocking about??

oooh.... just noticed youre down the road from me.... didnt think there were any other G60's down this end of the world

i have a bullit racing box on there with a shorter 1st,2nd,3rd standard 4th and a long 5th.... makes for really good fun in the twisty bits and good economy on the long motorway work

i have replaced the passenger top mount and it is now solid... need to do the drivers one. will need the brass collar that bolts down onto the top mount... any ideas where to get one or if someone has one spare i will happily take it

I am getting nearly 550 miles to a tank from my G60 at the moment, i have a late 1992 model (came with all early spec parts but late shell and fuel tank) :scratch: Suppose mine must be from the transition from G60 to VR6

i would like a black carbon windshield trim and scuttle cover... both in RHD... let me know when you have enough takers

1992 G60 PG engine code... have found a set from euro car partshttp://www.eurocarparts.com/ecp/c/Volkswagen_Corrado_1.8_1992/p/car-parts/suspension-and-steering/suspension/suspension-mounting/?669440320&1&e8a423ed33f0f210b64d615c896b14484309a4cb&000872 and a set on ebay http://www.ebay.co.uk/itm/GOLF-MK2-3-PASSAT-MK2-3-FRONT-STRUT-TOP-MOUNT-MOUNTING-/120440088088?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item1c0ac9e618 both listed as fitting want to be sure im not buying crap parts to then have to replace again in a year or so

what colour was it??? I was up that way in my G60 doing a bit of part shopping

Hi, I have terribles wheel wobble and a clunking noise when steering... i have had the front end apart today and my top mounts are shot. can anybody recommend where would be best to get them from, i have checked and GSF and Euro car parts both have them. There are also a few on ebay that say they will fit. any other suggestions are welcome. Regards, Owen

ill take them if theyre still going i have a few issues with my passenger window and could do with over hauling both

im interested in these as my bumper has come away a few times on larger speed bumps and the clips are looking a bit worn