Jump to content

dazzyvr6

Members
 View Profile  See their activity

  • Content Count

    3,426

  • Joined

Everything posted by dazzyvr6

  1. dazzyvr6
    you can buy the vents that you just cut and reweld into your wing,or theres a company coulled cool lourvers or something like that,that will press a vent into your existing wing..you have to take it off the car of course
  2. dazzyvr6
    ive had mine now for just over 3 years,and apart from new wheels seats,suspension etc,which didnt really need changing,ive spent hardly any money on it,apart from the obvious service parts,and ive now decided to take the car off the road to spend even more money on it even though i dont really need to
  3. dazzyvr6
    looks like they have given you a wrong gasket,as the numbers ive given you are sequential,and gavins given you the same number
  4. dazzyvr6
    thats so true,theres a lad up the road from me with a 500bhp cossie,nothing touches it..good strong engines in my opinion aswell
  5. dazzyvr6
    it depends how noisy they are,and for the price i would change the both sides
  6. dazzyvr6
    http://the-corrado.net/.archive/forum/viewtopic. ... er+removal
  7. dazzyvr6

    Sill Paint

    dazzyvr6 replied to gradeAfailure's topic in Exterior

    you can buy stonechip spray in a can from halfords which is used on sills
  8. dazzyvr6
    did all corados have the cable change gearboxes though?
  9. dazzyvr6
    try taking the gearstick surround off and look at what the cables are doing whilst selecting 1st and 2nd,if everything looks all well and good look under the bonnet and do the same,have you tried putting it in 1st when the engine is turned off and then try to push the car??
  10. dazzyvr6
    its called taking care of your investment :)
  11. dazzyvr6
    better off looking for one with a manual gearbox,my mate has got a mint black one,very quick,and hes put it into storeage
  12. dazzyvr6
    probably something like running a vr6,and it was named a future classic alongside the corrado
  13. dazzyvr6
    if you can find one..mercedes cosworth,very quick,comfy and with nice looks
  14. dazzyvr6
    vw sharan??
  15. dazzyvr6
    looking nice furki,i get the same when i used to take my car for mots etc..only found one place where there ramps are flush with the floor..but the brake tester was a bit tricky
  16. dazzyvr6
    depends on your budget..if i sold my vr i would probably get an evo 6 or 7
  17. dazzyvr6
    theres only 1 other gasket that i can spot and its the gasket for the upper to lower manifold which is 027 129 717d which is for the 9a engine code?
  18. dazzyvr6
    theres a little plastic pin on the underside of the handle,take that out then it should slide off
  19. dazzyvr6
    027 129 717f which is the upper to lower manifold gasket 037 129 717e
  20. dazzyvr6
    cheaper to get stainless then..
  21. dazzyvr6
    my etka came up with these part numbers upper(50mm)027 133 201 ac lower(50mm)027 133 202 f
  22. dazzyvr6
    :shock: when i bought one for mine im sure it only cost £12
  23. dazzyvr6
    depends on the et you get, and tyre width,ive got 17's on my car lowered approx 60mm,running 205's and not done any arch mods at all
  24. dazzyvr6
    why not drive over to cannock and get your parts from http://www.midlandvw.co.uk/
  25. dazzyvr6
    vr6 cat back stainless steel magnex fits like an oe system,looks better than an oe system,sounds nice and cost me £230 fitted at demon tweeks
×
×
  • Create New...