GrahamU 5 Posted February 27, 2021 (edited) Had my wheels refurbished this week Just need to get the centre nuts anodised black now And had these done for my Golf 6R Edited February 27, 2021 by GrahamU Quote Share this post Link to post Share on other sites
GrahamU 5 Posted February 27, 2021 (edited) Decided I would put the fuse box under the bonnet using the mk5 fuse box, so will wire it to this rather than the fuses I mounted under the scuttle Waiting for a battery box to arrive so I can have the matching pair. I did have the battery in the boot but thinking it can look better under the bonnet in a proper box Edited February 27, 2021 by GrahamU Quote Share this post Link to post Share on other sites
Dox 22 Posted February 27, 2021 I had that fuse box on my old Octavia, check the fuse for the lights, there’s 2, the one nearest the screen (standard size - the other is super size) had been arcing on mine causing 7 lights to go out - can-bus etc Quote Share this post Link to post Share on other sites
GrahamU 5 Posted February 27, 2021 I need to go through it thoroughly being second hand but thanks, that good to know 👌 Quote Share this post Link to post Share on other sites
tony_ack 0 Posted February 28, 2021 (edited) FFS...! I've just spent the weekend stitching my battered centre console together with 3D replacement bits and a soldering iron. Wish I'd seen what you'd done with the MK4 one first - looks fantastic. A bit late now, but I solved the sticking out climatronic panel by putting the u-clips on the clima panel and mounting it behind the centre console insert - completely flush that way. edit - just realised your is an early dash, so the clima panel would probably sit differently to mine Edited February 28, 2021 by tony_ack Quote Share this post Link to post Share on other sites
Cressa 44 Posted February 28, 2021 All looking great. Keep up the super OE look 👍 Quote Share this post Link to post Share on other sites
GrahamU 5 Posted March 3, 2021 (edited) Set up my TPMS sensors today. I dont have CAD of the wheel and tyre so had to go old school by cutting an old tyre up, small hint, if you have a door directly into your house from the garage, best not to cut a tyre up using an angle grinder, the wife was not happy with the smell 🙂 The TPMS I have is F1 technology so has an infra red sensor looking directly at the tyre carcass as well as the pressure and air temperature, not much use on the road but adds to the gimmicks I've set the pixels to look at 5 points across the flat of the tyre, some teams have them looking at sidewalls because of camber they use but I won't have alot of camber so not a concern. will see something like this on my display In other news, the battery bow arrived so that will be looked at over the weekend Edited March 3, 2021 by GrahamU Quote Share this post Link to post Share on other sites
Cressa 44 Posted March 3, 2021 This is an absolute pleasure to see you taking on the modern tech in a Corrado. Great reading 👍 Quote Share this post Link to post Share on other sites
GrahamU 5 Posted April 12, 2021 (edited) Another post and some more pics Also fitted the fuse box and battery box from a mk5 Also had some photos of my R by a friend of my son who is trying to build a portfolio, was pleased how they came out Edited April 12, 2021 by GrahamU Quote Share this post Link to post Share on other sites
oneohtwo 8 Posted April 13, 2021 Ooh, now I like that last photo. Where was that? Quote Share this post Link to post Share on other sites
GrahamU 5 Posted April 13, 2021 7 hours ago, oneohtwo said: Ooh, now I like that last photo. Where was that? That was in a local detail booth, was a little worried before it went in but the paint wasn't too bad Quote Share this post Link to post Share on other sites
GrahamU 5 Posted April 21, 2021 (edited) Next task, the rad fan driver The mk5 fan is too big for the rado rad so I have a slimline in place but I wanted to have the control from the ECM which sends square wave pulses at different frequencies for the speed To get that I needed the mk5 controller board that is on the back of the rad fan, so started by stripping it from the motor The tabs that would usually connect to the brushes were folded back and wires soldered to them The wires were then run to the slimline, it also has the output for the second fan if I choose to add it at a later date I mounted it to the inner wing so it will be mostly tucked up behind the headlight The whole electronics is potted into the metal heatsink housing so nothing extra was needed Edited April 21, 2021 by GrahamU Quote Share this post Link to post Share on other sites
oneohtwo 8 Posted April 25, 2021 (edited) On 4/13/2021 at 8:19 PM, GrahamU said: That was in a local detail booth, was a little worried before it went in but the paint wasn't too bad Looks very sci-fi! Having just been wrestling with slimline fans myself, that's a neat solution. I had hoped to do similar to you and just reuse what was on the back of the fan, but on the original it's not nicely housed unfortunately. How did you mount the controller to the inner wing? Thinking that might be a decent location for the panel resistors I ended up using. This is all very impressive stuff, will be great to see it finished! Edited April 25, 2021 by oneohtwo Quote Share this post Link to post Share on other sites
GrahamU 5 Posted May 3, 2021 (edited) Thought I'd try a different steering wheel 😉 Edited May 3, 2021 by GrahamU 1 Quote Share this post Link to post Share on other sites
Cressa 44 Posted May 3, 2021 2 hours ago, GrahamU said: Thought I'd try a different steering wheel 😉 Was that removed from a spaceship 😂. Absolute quality 👍 Quote Share this post Link to post Share on other sites
fla 9 Posted May 3, 2021 I love the way Graham raises the bar and then goes above it himself! Quote Share this post Link to post Share on other sites
GrahamU 5 Posted May 3, 2021 Unfortunately I have to give that one back 😞 but I may try something similar at a later date 🙂 Quote Share this post Link to post Share on other sites
GrahamU 5 Posted June 3, 2021 (edited) A few more updates Bought some skirts to go on it, rep ABT skirts that are similar to the mk3 GTI but single peice Just because I can, the electric handbrake is fitted click on pic for video (hopefully) And following the recent madness for the sale of a centre gauge, I have gone digital instead She is nearly ready for the road, I have sent of the V5 to update the colour and engine, need that back to try to insure and claim for a new screen🤥 if they allow it 🙂 Then need the driveshafts cos the one I bought doesn't fit and the second one is still being made since before xmas 😡 and finally sort the bonnet and MOT 🙂 Edited June 3, 2021 by GrahamU Quote Share this post Link to post Share on other sites
fla 9 Posted June 4, 2021 (edited) superb as always Graham. Great touch with the digital gauge screens. E-brakes sound fantastic! Edited June 4, 2021 by fla Quote Share this post Link to post Share on other sites
GrahamU 5 Posted June 22, 2021 (edited) Finally received the BBS centre caps from China, they dont look to bad once fitted Also heard from the guy making the short driveshaft who has said he could not do it, 🤦♂️only 7 months waisted waiting for it Some time spent researching and found the Skoda VRS shafts are the correct length but the spline for the outer CV is for the 5 stud flange, as much as I tried I could not find a CV that fits the shaft and the 4 stud flange, so option 2 (or is it 3 or 4) take a 5 stud flange and make it a 4 stud 🙂 Started marking out the holes and realised they old stud holes needed welding, especially as I decided to use the M14 wheel bolts That all went well, and the studs fit nicely And it fitted together following a strip down of the the hubs with new bearings fitted and never seen the road 😞 Thats 1 side done, I'll do the other side next weekend Edited June 22, 2021 by GrahamU Quote Share this post Link to post Share on other sites
Cressa 44 Posted June 23, 2021 The centre caps look a great fit. As for the rest of your miracle work, it looks great. You must have a superb garage set up Quote Share this post Link to post Share on other sites
GrahamU 5 Posted June 27, 2021 (edited) This weekend saw the second drive flange modified and the driveshaft fitted to the car Then following a bleed of the brakes it was finally time to see if it moved Couple of vids, click to view Then while it was sat outside I thought I'd get another pic, it seems to have some camber on the rear, I assume they all have some but its more noticeable being speced out from the brakes May need to see if I can reduce that camber Edited June 27, 2021 by GrahamU Quote Share this post Link to post Share on other sites
GrahamU 5 Posted July 11, 2021 (edited) Some mods to the bonnet this weekend, have gone for some RS turbo vents started by making the position and cutting a hold Sunk in the metalwork Tack welding into place Welds ground back Then some filling Edited July 11, 2021 by GrahamU Quote Share this post Link to post Share on other sites
fla 9 Posted July 12, 2021 Is there anything car-related you cant do, Graham? Quote Share this post Link to post Share on other sites
fendervg 30 Posted July 12, 2021 1 hour ago, fla said: Is there anything car-related you cant do, Graham? Come to Ireland and fix all my bodywork and rust issues? 😉 Quote Share this post Link to post Share on other sites