GrahamU's 2.0 TFSI with DSG

[_Matt_ 24]

Nice Graham, I mentioned on FB I liked the ABT skirts - finishes off the sides really nicely with the extended splitter and larger wheels. 

 

[GrahamU 5]

Had a Corrado Club of GB meet today, was a good turnout, just a couple of photos

Edited May 8, 2022 by GrahamU

[1xshaunx1 27]

Looked like a fun day out. Any niggles with the car on its day out. 

[fla 8]

Great pics. Anyone from the forum there?

[GrahamU 5]

6 hours ago, 1xshaunx1 said:

Looked like a fun day out. Any niggles with the car on its day out. 

Luckily, other than some rubbing on the rear aches it behaved itself quite nicely

 

4 hours ago, fla said:

Great pics. Anyone from the forum there?

TBH I'm not sure if there was

[oneohtwo 6]

Interesting line up there! A few that look a bit different to those on here... apart from yours obviously!  I really must join the CCGB, not sure why I never have.

I was thinking I rather like the rear mudflaps you have, make the car look quite nice and squat from the rear, and also close off that bit of wheel arch where you can see through the rear bumper to the ground. Always think that makes the bumper look a bit cheap and stuck on... 

Where did you get them?

[_Matt_ 24]

I was going to go to the event as it is near me but still waiting for some spring top plates from VW Classics. I assumed they would only take a few days so took it apart ... 2 weeks later and 3 weeks to wait. 

oneohtwo you could join the facebook group - that is were the events are advertised. I don't get much at all from the £15 I pay a year - this forum is far more useful/active (facebook group aside as that is free).

 

 

 

[GrahamU 5]

7 hours ago, oneohtwo said:

Interesting line up there! A few that look a bit different to those on here... apart from yours obviously!  I really must join the CCGB, not sure why I never have.

I was thinking I rather like the rear mudflaps you have, make the car look quite nice and squat from the rear, and also close off that bit of wheel arch where you can see through the rear bumper to the ground. Always think that makes the bumper look a bit cheap and stuck on... 

Where did you get them?

Thanks, the mudflaps were universal from ebay

 

6 hours ago, MJA said:

I was going to go to the event as it is near me but still waiting for some spring top plates from VW Classics. I assumed they would only take a few days so took it apart ... 2 weeks later and 3 weeks to wait. 

oneohtwo you could join the facebook group - that is were the events are advertised. I don't get much at all from the £15 I pay a year - this forum is far more useful/active (facebook group aside as that is free).

 

 

 

The charge for CCGB does seem a little much for a couple of mags and a sticker that I cant use, but I did go to the day at Brooklands last year, would like it if they did that again so I could take mine

[Cressa 40]

Ccgb did a write up by Chris Gaskell in the Sprinter magazine on the fitment of genuine mudflaps to a corrado.  Worth every penny as the rears have a white VW logo on. I fitted these to mine. 

[GrahamU 5]

Looks good Cressa

 

 

COuple I took today with the other cars

 

 

And an arty shot

Edited May 15, 2022 by GrahamU

[GrahamU 5]

Another weekend and its first show, some good comments but also some negative from an owner of a cheque book car so I wont worry too much about that 

Parked up with another Corrado, some of you will also know Stuart

Edited May 23, 2022 by GrahamU

[Cressa 40]

The car looks great and a cheque book cannot buy what you have.

Well done in achieving your car and getting her out and about. I'm definitely jealous as my car is blocked in, but yours is great to see

[fla 8]

I'm curious as to what negative comments there were on your first class creation...you're right to ignore though

[GrahamU 5]

15 minutes ago, Cressa said:

The car looks great and a cheque book cannot buy what you have.

Well done in achieving your car and getting her out and about. I'm definitely jealous as my car is blocked in, but yours is great to see

Thanks, appreciate it

10 minutes ago, fla said:

I'm curious as to what negative comments there were on your first class creation...you're right to ignore though

Comments were about the paint, I am still working on that and I'll be the first to admit it still needs work, but he walked up to the front looked at it and then said the paint was sh*t, look at that run, then walked off, had no idea about the rest of the work that went into the car cos he could not see past a run in the paint

[Wilko13 2]

At least you can say you have done it your self this car is fantastic I can only dream of having mine anywhere near as good as this.

I painted my mk1 caddy and I’m the first to say the paint is crap but at least I tried rather than handing a blank cheque over and saying do all the work.

Have confidence in your work and show it off with pride


Sent from my iPhone using Tapatalk

[fla 8]

10 hours ago, GrahamU said:

Thanks, appreciate it

Comments were about the paint, I am still working on that and I'll be the first to admit it still needs work, but he walked up to the front looked at it and then said the paint was sh*t, look at that run, then walked off, had no idea about the rest of the work that went into the car cos he could not see past a run in the paint

The funny thing is people say more about themselves with comments like that. I think the admiration shared on the forum is a more accurate representation of what people think.

[Keyo 47]

I wouldn’t worry about it , stock especially vr look absolutely wank from factory especially the ride height . Bit of aero and drop transforms a Rado . 

Edited May 24, 2022 by Keyo

[Dox 20]

1 hour ago, Keyo said:

I wouldn’t worry about it , stock especially vr look absolutely wank from factory especially the ride height . Bit of aero and drop transforms a Rado . 

 

the guy probably has an RS3 on pcp, maxed klarna account and £5ks worth of polish? That’s your modern car show attender for you

[_Matt_ 24]

14 hours ago, GrahamU said:

Thanks, appreciate it

Comments were about the paint, I am still working on that and I'll be the first to admit it still needs work, but he walked up to the front looked at it and then said the paint was sh*t, look at that run, then walked off, had no idea about the rest of the work that went into the car cos he could not see past a run in the paint

 

No need for that what a complete an utter arrogant bell end. Sometimes you keep comments to yourself and that chap is an example of one that lacks basic emotional intelligence. I am sure it won't but don't let you stop using it and most of all showing it - you've done a lot of work most could only dream of figuring out. 

Both cars looked great at the show.

[GrahamU 5]

thanks guys 👍

[STU175 0]

yeah stuff him graham!

thanks for the jump start,

Im investigating battery drain problem tomorrow. 👍

[GrahamU 5]

On 5/27/2022 at 10:17 PM, STU175 said:

yeah stuff him graham!

thanks for the jump start,

Im investigating battery drain problem tomorrow. 👍

Lol, now you have mentioned it I can put this one up

 

What did you find?

Edited May 31, 2022 by GrahamU

[Bauhaus 3]

On 5/23/2022 at 9:31 PM, GrahamU said:

Thanks, appreciate it

Comments were about the paint, I am still working on that and I'll be the first to admit it still needs work, but he walked up to the front looked at it and then said the paint was sh*t, look at that run, then walked off, had no idea about the rest of the work that went into the car cos he could not see past a run in the paint

Thats why I hardly ever display my Corrado or even post pics of it here as there is always some kind of "armchair mechanic" thats going to piss over some detail of it.

But you've done a really top notch job with yours Graham 👌

[fla 8]

i wouldnt worry about comments here, pretty much all of us respect others' work and only usually share what we've done or ask for advice.  FB and the like are another matter..

 

Hasan

[GrahamU 5]

I thought that when it hit the road then spending time working on it would stop, how wrong was I 🤣

So, today I started on my snag list

first on the list were top mounts and check the shocks as I had some knocks and bangs

Not bad for 250miles, so replaced with VR top mounts

The Koni's dont seem to have liked being sat around for the many years I have had them, I cant remember if they are gas shocks but they dont extend again and one of the top adjusters has stopped turning so they are going for refurb. I've had to fit some ap shocks instead.

While the passenger shock was off I took the opportunity to remove the driveshaft and replace the outer CV which had started clicking, 

Wheels on and off a few times trying to get the height and camber right which looked good till I drove it tonightwhere the camber on the passenger side settled to -3° so thats another job for tomorrow.

But it drives like a different car now and once I get the tracking done I hope it will feel as it should

Edited June 2, 2022 by GrahamU