KADVR6
-
Content Count
4,353 -
Joined
-
Days Won
1
Everything posted by KADVR6
-
£80 posted lol only joking
-
removed these just before xmas as i fitted my brembo's, they worked just fine and pistons worked just fine. Sale is just for the carriers and calipers, will get a pic up later but they are just standard vr6 brakes, but a good upgrade for valvers etc £30 posted karl
-
yeh the late one is still available cost me £78 for all of them
-
would like to see ed's face when he is told its all ok apart from the heater matrix needs replacing, haha
-
here is mine at the moment, but this will be changing this weekend hopefully.
-
set of 16" mini comps with brand new bridgesone tyres for £50 set of 17" RC that had a fresh refurb for £110 H&R coilovers for £100 in the box weitec tx coilovers £200 in the box BMC CDA for £50 in the box and shed loads more that i cant even remember, i'm still 1000's of pounds out of pocket though lol
-
bloody bargain
-
ok pm on its way Shaun
-
that is what i call a saturday from hell, feel for you mate
-
what wheels you got then Shaun.
-
bought these to go on my RXs as wanted some new ones, then fitted them and decided i wanted some silver ones instead, they were on the car for approx 3 hours then i changed my mind lol they are 56mm across and will fit RX/RM alloys and maybe some other BBS alloys but i'm not 100% sure which ones £30 posted
-
How to: Open a stuck door
KADVR6 replied to OllieVR6's topic in [Archive] Wiki Submissions & Collaboration
haha yeh that sounds about right, all i can help with is it bloody fiddly and very very annoying but you can do it. -
if it helps i have all brand new nuts and bolts for doing this, and as for the gasket yeh its very easy to tell which one you need as one fits and one wont.
-
these subframes could be usefull, think you could get them to go lower easily enough?? http://www.edition38.com/forums/index.php?showtopic=440794
-
yeh you can, but these seats are very very rare so you wanna treat them with respect. So come on how much did you get them for (pm me if you like) as i was watching/bidding for them on ebay and my last bid at £500 was the highest until they were taken off with 5ish days to go. i'm not that bothered i did not get them but just curious.
-
very shiny mate, have you looked any further into mounting the A8's yet??
-
this might help you maybe?? http://the-corrado.net/showthread.php?45412-Big-Ben-s-VRT&highlight=marcus
-
marcus from off here a few years ago had some fitted mate.
-
are these manufactured or available?? mine are shot again on the front (genuine vag) after about 5k, the mounts them selves are fine but the bearings are shot, as in the casing that holds the bearings has just split again. cheers karl
-
Mmmm the best seats ever, well done mate
-
Lots of corrado bits... Pics now added to the thread
KADVR6 replied to tut_gareth's topic in Parts for Sale
prices might help mate -
caustic soda will work, BUT it could actually eat the alloy depending on the grade of alloy used, if you dont wanna go down the shot/vapour blasting then get a 240 grade flap wheel and use a corded drill, this will shift it all but could look ****e afterwards, and for £20 a wheel to get them powdercoated i would not even bat an eye lid and just get it done properly.
-
good luck with the sale.
-
if nitromoors aint touching it then just go and get them vapour blasted, and then powder coated or a diy paint job with some hammerite.
-
hi Bill, received the bushes and the doorhandle this morning so thanks for the quick delivery, i was only expecting the rear bushes, so was nicely surprised to get the front ones also, your a star mate. Karl