woody

No andy noware enough boost m8. That was why john got rid of his john cooper one which he was going to fit to the westfield Cheers Woody

And the inpro's are projector lighting units so that you can fit HID kits, like the ones that i have. Cheers Woody

Is there a strip of plastic between all of the buttons and have either of the locking tabs broken off the ABS switch

Why not get an alarm which combines the keyless entry then fit passet handles. You could still retain the boot lock to get you into the car in the case of a flat battery.

Samco will sell you the individual pipe which might be a cheaper than the original in black( thing thats one of the colours they do) Ring them up direct and describe the pipe you require from the VR6 kit. It will have a samco part number on it own which you can then order from Venom, demon tweeks etc. Cheers Woody

Henny's original block was made by John Mitchell 16vG60 as i remember henny driving down to collect it from him on a sunday and then coming to the GTI meet

Can someone tell me with the exact length end to end for the leads to the dizzy cap on a Corrado G60 including metal parts. I am having a bloody nightmare with sets of leads from nology they either send a set that they cliam are the kit for a g60 but are two short or ones that i could route arround the engine bay twice. This has been going now for eight weeks and i am really fed up with it all now. They now say that they will make a go through all of their boxes and pick out a suitable set providing i can provide lengths for them. I cant measure my own as i do not have the car at the moment. Cheers Woody

is there oil (Mayo) colouring within the water expansion tank = head gasket. Does the expansion tank look new, I had a new one from VAG and it had a fault on the sender which is inside to register flow of fulid, after having thesame fault on my original, got another and it fixed the fault

Same kit that JMR fitted for me. The light is oh so much better. I saw a corrado with standard lights and no headlight loom the other day i think. The lights were so dim i swear the guy was screwing his eyes up trying to see.

undo grap handle 2 x screws ( passenger side ) remove coat hangers (move plastic bit up towards the roof screw underneath), Removal of the plastic panels above door ( watch out for little white plastic clips about 10mm long (mine pinged all over the place ) Must be chaeap from VAG :lol: Then undo the kick panel by door (passenger side two screws, drivers side 1 screw i think and one nut under gas pedel). I cant remember how the inside kick panel comes off (screws?). Hope that helps Cheers Woody

yep they all have to come off, I had to strip mine down the other week. Remember to be careful with the rear doorcards down the bottom near the front doors as these can be a little brittle. Half hour tops both sides if it stops raining. Cheers Woody

if you bugger it up i have a spare roof lining in my garage. But good luck m8 16vg60 on this forum had his done in white leather, and i beleive that Ant Bananaman sprayed his black a couple of years ago with that suff from B&Q and then combed it. Oh I also have a spare sunroof interior panel from my original sunroof, i suppose you would have to get both of them done at the smae time. Cheers Woody P.S there is a company in christchurch who sprayed my grey VR dash to black 3 year warrenty against cracking or discolouring. The compony is called IMAGE.

i am in the same boat need to get two of my BBS rims refurbed, I found a place in christchurch that wanted £80 a wheel which i thought was a bit steep for the scratching, scuff i have

I worry even more m8 my Angel eye set and Audi RS6 lighting system £135 for the angel eye and £50 for a bulb if a stone went through one.

,ight be better off talking to g werks. They sell baffled sumps, and you are right the bolts nearest the starter motor are a sh*t.

£5 for the barrel as supercharged says and about £8 to match it to your main key from vag

there are always bargins about, just got to keep looking, I managed to a electric 911 seats for £65 the other week. Mind you the bloke set the auction up wrong with a finish time of 6am instead of 6pm. But fair play he did not try to wriggle at all. Keep looking :D

I have a couple of tweeters which were never fitted on my audioscape build, I could put pics up this evening. pm me. there are just in the box in the garage

get thise injectors cleaned :crazyeyes: if not newish. Also are you still runing stock intercooler Yay to the custom remap as well

yes good price but they are going to rub like anything m8. You might require to have all of your arches pulled

Thanks ANT i will get on to them tomorrow

Just after waiting six weeks received my Nology Hot wires today. Went to install them on the G60 tonight and to my dismay found that all four plug leads are the smae length. Installed them anyway and found that the nearest plug to the dizzy flopps with loads of spare and the one farthest away from the dizzy in like a piano wire. This can not be right???????? P*ssed off after waiting do long and they look cr*p in the engine bay for the price that i had to pay to get them, reguardless of their abilities to create a better spark. Anybody had the same experience with theirs ???? Cheers A very fed up Corrado owner Woody

Yep thanks a lot

mine started out out 185 and ended up with 212 so that gave me an extra 27 bhp and it felt like a lot more on the way home. Very nice guy ray and was even really helpful after i nearly chopped his thrumb off in the bonnet. Plus you can wander up to the circuit and get some lunch.

yep pic wouls help me out as well please