woody
Members-
Content Count
612 -
Joined
Everything posted by woody
-
Yes ant your are right i had forgetten about that.
-
can you here the flap opening & closing when move it from hot to cold. The cable might have come disconnected when you charged over the panel
-
I seem to remember henny running over his RS4 bumper at some time or another. When JMR originally fitted my RS4 bumper he moulded iin the correct ironwork to mount the bumper removing the plastic mounts. Cheers Woody
-
also look at the cables which go from the atenator to the just above the black cylinder above the starter motor. Mine did this and the nut and combined with some surface rust on the terminal had come loose, i.e intermittent connection combined with engine running caused the battery light to flicker. Cheers Woody
-
I run BBS 17" and had to get the front edge of the arches flared out when fitting my 15mm spacers to allow my brembos to be fitted. Cheers Woody
-
The only thing which would worry me would be that suspension from a MK2 golf made for how much a golf weighes might not be able to handle the eatra weight of the corrado. Cheers Woody
-
I have had much the same as Blue Joe but I used a Audi RS intercooler under an RS4 bumper (Crash) RS2 now which was the only option so that the vents were used for the intercooler and oil cooler. This also allowed me to move the Rad down so that some of the air which goes into the three bar grill goes into the engine bay
-
My C is going doen to JMR to have the Audi A6 delocked flush handle conversion done at the end of the month. I got the aboue kit from Richard at Venom. After speaking to John ( who has done 3 or 4 of these conversions now) The only things you need to make up are the rods which connect within the door to mate up with the mech. Cost wise you are looking at £125 for handle and plate kits £250ish for cutting,inserting platework, welding and then respraying door pus £150 for the sprip sown and making up of the rods and fitting all back togesther. Give 16vG60 a PM .
-
In the set of pics what are all those buttons on the steering wheel
-
Multiple keys. Can i fix my door handles so i can have 1 key
woody replied to quicky1980's topic in Interior
vw made up new door barrels for me to match the ignition barrel. I seem to remember it was £8 for each barrel and a £10 to have them make them up to the ignition barrel -
Did you get any impending warning lights on the dash coming on and flickering when you started up the car in the mornings. If so could be the Alternator. Also check the wires to the connection t the starter motor as these become corroded
-
I had something like this on my Mk 2 golf. It ended up being the starter motor not disengaging correctly when the enginer had started.
-
At the end of this month i am having the A6 Delocked handles mod done by JMR. My boot key lock has never worked with the normal key and reading all these stories about peeps getting locked out with delocked handles with a flat battery in the cold weather worries me. Can this barrell be taken out and replaced to marry up with the main key? I remember i had some door barrells made up by VW about two years ago Cheers Woody
-
That pipe came off on me. Nearly sh*t myself. throught my charger had blown. Loads of power loud pop and suddenly i was driving a Shopping trolley.
-
when i had my C remapped by West Tuning the chip had a load of corrupt lines of code and stranage numbers within it from people messing about with it. on the rolling road it showed 185bhp. After Ray (west tuning had gone back to basics to a bog standard chip and made a few tweeks the car pushed out 212.bhp. I can say i was well pleased.
-
My Italavolante (spelling) wheel
-
Yes the two long grills just pop straight up, there are either 6 or 8 clips on each side. Remove the speaker covers first small screwdriver carefully to allow you to get at the ends of the plastic grills (dont be brutal!!!). The centre grill will only come out last as it slots underneath the others. Cheers Woody
-
Not in the gilford area but you could put the passenger side in the drivers side and send the drivers side away for a week to mj interiors i beleive can match colours of leather,
-
there is a g-lader on the for sale section this morning http://the-corrado.net/.archive/forum/viewtopic.php?t=34663
-
http://www.cardecautointeriors.com/cata ... index.html
-
Trying to strip a new late style dash to send away to have it leathered. I am trying to get it as light as possible (postage) plus it will allow the trimmers to tuck in the bits better. Problem i have is removing all of the vents there are screws attaching them to what would be the top of the dash. How do I get at them?
-
The angel eyes group buy which J. Mitchell sorted out earlier in the year only came with the lights themselves. You had to get bulbs x 4 and also either buy height adjustors from VAG or remove the adjustors from your standard lights. That said the lighting they produce is much better than standards ( On my car it is anyway)
-
I have a couple in the garage, give us a pm if you need one
-
FK Koni adjustable height / Dampening suspension
-
Audi RS2 Intercooler behind centre grill of a RS4 bumper ( bumber was rearranged by a Kangoo now sitting under RS2. work by JMR