easypops

I've got 2 breakers, however, both have rear passenger arch rust/repairs. Fire up a picture of the bit you need and I'll see if there is a decent but that'll match

Will do mate, it'll be tomorrow though as I need time to pick them off the car

Bit of a long shot but it happened to me, on my old 16v. I found 2 split wires and the plastic sheathing was still intact, the wires in question were under tension where they plugged in and gave up eventually. I found them while rummaging around while the car was running.......I was chasing a very bad idle at the time, fixed the wires and all was well.

Should have the interior light, door pins, plastic door lock pins,glovebox light,handbrake handle, seatbelt covers and possibly a couple of other bits but I'm at work just now and can't be sure

:lol:

Got a breaker here with a gearbox still in it, I'm afraid I don't know what the crown wheel is? Might well have it though :)

Happy to collect it mate, makes payment easier too. Let me know where and when and I should be ok to meet up :)

Fuel filter, cabin filter, oil filter and sump plug for me please mate :) And the 2 mirror glass also please :)

Fairly sure(at least I hope) that I removed this when I robbed the teves20 stuff from the old (late)golf VR I had. I'll look tonight and get you a number/pic hopefully

As above, have had the Toad ai606 on both my Corrados and both time they have been faultless. I'll be putting one on the Storm once its roadworthy too

No mate, it's the Gliptone liquid leather stuff, seems to do a nice job, the real test will be the front seats as they are dirtier and drier. The photo does well to hide all the wee marks, so not quite as good as it looks

Tonight I cleaned and conditioned the rear seats, still got a few small marks on them but much cleaner and smellier :)

Is there an ecco? :lol:

The seats do look spot on, very nice indeed 8)

Looks great mate, nice job on the bonnet foam, the ignition switch isn't too bad, fairly sure I ended up getting to the screw from above after trying from below, getting it back in was the worst bit. Let's see some pics of these seats then 8)

I had a similar, occasional misfire. Turned out the back middle lead wasn't seated on the plug correctly. Worth a look, and free too :)

Nice one, working ok now? Mine felt like I had put a new starter motor in when is changed it

Stick up a picture, I've got various corrados in partly stripped state, should be able to help if I know where to look

I can see the ad mate, also spotted the first one, that was in cars for sale? Pity I'm a bit skint :lol:

Nice one, always nice to hear about the solution to a problem:)

That wouldn't be a classic green drivers side wing hiding in there, would it? Love the S2, had a Audi coupe quite a few years ago, was always impressed how well built it felt

Loving this, front end looks superb 8)

No progress to report as the welder hasn't been able to manage back, mostly due to the wet weather, yes, it's been raining up here quite a lot :lol: I started stripping all the inards from the crusty drivers door, and found another nice bodge(I think) on the central locking part? A spring attached to the top part? Who knows what for, obviously didn't re use it :) Also had trouble getting out the reverse threaded screw on the door handle......someone must've had a real hard time with that in the past :lol:

Up :)

Ah, a little bit far for me :)