STU175

Corrado 2.0 16v 9a abs ecu 1h0 907 379 d £30 [attach=config]61257[/attach]

Corrado 2.0 16v 9a engine ecu part no. 8a0 907 404 l £40 ono [attach=config]61249[/attach][attach=config]61253[/attach]

CORRADO 2.0 16V 9A BRAKE SERVO & MASTER CYLINDER PART NO. 358 614 105 £40 ono [ATTACH=CONFIG]61241[/ATTACH] [ATTACH=CONFIG]61245[/ATTACH]

i would connect to same supply your radio uses, the 12v ignition switched one NOT 12v permanent...

im after a replacement too 50mm or 90mm.... there must be something similar off another model that will fit? if every one keeps an eye out for suggestions we must be able to come up with something?

get some covert cameras fitted somewhere if possible??

mine didnt come either

thats what i thought

Whats the difference between LH & RH Drive Coolant hose set? looking at buying some which seem alot cheaper in the LHD version? Any one happen to know what would be different?

how much you after for engine with gearbox dont need driveshafts?

Get an advert done for the engine whats included, been done to it etc. may be interested

thanks for the info.vw never seem to be that helpful! flywheel now off ! what i cant under stand now is i have 4 core plugs under the flywheel on side of block? -the two with the arrows in link above i measured at 24mm? -one 14mm -one 36mm hopefully i can get right ones now with this info

i have just spoken to vw about replacement core plugs. they can see a few different size ones but cant tell me which ones i need for flywheel side of block as in link above i havnt got the flywheel off yet so cant measure. can any one tell me which size they would be or even better a part no??? thanks stu ---------- Post added at 4:57 PM ---------- Previous post was at 4:25 PM ---------- bump for updated title

ah knew someone would have a trick for this one thanks floppyman

right gearbox,clutch and clutch pressure plate is is off... next problem i cant undo the flywheel bolts.. the flywheel just turns aswell.... any tips apart from using an airgun cause i dont have access to one?? HELP

yeah thats what i thought at first had it off aswell all fine. im not that fortunate for it to be an easy to get to part like that!! thanks for your input anyway m8 ---------- Post added at 12:40 PM ---------- Previous post was at 12:35 PM ---------- Ah that looks like it could be the culprit. is it like the core plugs on back of engine? i cant seem to see any of these holes or plugs on etka or bentley manual? dont suppose any one know what they are called or even a part number? Thanks for the photo

im after a little advise... today i noticed a small water leak from from my car. upon inspection it appears to be coming from between the block and gearbox exiting via the flywheel inspection plate that bolts to side of gearbox??? i have double checked its definatley not any pipes from above the gearbox/head?? how can this be surely theres only the crankseal between the gearbox and block and would leak oil not water then. is there any coolant core plugs behind the flywheel? cant see anything else wrong runs well no oil in the coolant, oil looks fine on the dipstick? Help looks like gearbox off to investigate.....

well this kept me busy today[ATTACH=CONFIG]56041[/ATTACH] had kept hold of spare subframe and steering rack of my old 16v so set about a rebuild. wire brush attachment to metal then acid etched primer them some hammerite i had laying around. came out pretty good i think. fitting was interesting in the end i sat the whole subframe on a scaffold board then slowly built up the height each side using some more scaffold boards untill it was high enough to get the bolts in.. works a treat if your fitting on your own. anyone see the un-deliberate mistake i made on the assembly i didnt notice untill i had the subframe in place ??????:bonk:

ah can anyone tell me if this would be the mastercylinder i need to fit my s2 front caliper to my 91 g60?

http://the-corrado.net/classifieds.php?do=viewitem&itemid=710

search for heater matrix change im sure its covered in there :smug:

hi mate names stu but not far off LOL

[ATTACH=CONFIG]47666[/ATTACH][ATTACH=CONFIG]47667[/ATTACH][ATTACH=CONFIG]47668[/ATTACH][ATTACH=CONFIG]47669[/ATTACH][ATTACH=CONFIG]47670[/ATTACH][ATTACH=CONFIG]47675[/ATTACH][ATTACH=CONFIG]47673[/ATTACH][ATTACH=CONFIG]47674[/ATTACH][ATTACH=CONFIG]0[/ATTACH][ATTACH=CONFIG]47671[/ATTACH] last one is the stand on sunday, hi to everyone i met awesome weekend, camping made the weekend for me

the white G60 was my one! chatted to a few around the stand on sunday but not good remembering names. LOL will post my pics up tonight

http://the-corrado.net/showthread.php?55347-GENUINE-Corrado-bentley-repair-manual-%A350-delivered still got it £50 delivered?