STU175

http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=160435457163&ssPageName=STRK:MEWAX:IT that is what i saw advertised.didnt pay £45 so thought was worth the risk i didnt find the photo of how it mounts untill after ide brought it :( anyone think i could get this to work some how? definatley ruled out bonnet scoop as my mate suggested :pukeright: it must have worked on the syncro but that doesnt have corrado headlight right in the way of the air intake???

hopefully someone can advise me if this intercooler ive brought will be worth installing as it isnt what i had expected to get. I thought it was gonna be the front mount version not like i received :( i have found a photo of what ive brought im un sure it will get enough air into it?? :confused4: 2.8l 24v Climatronic system.pdfchaneys_vw_golf_g60_syncro_1.jpg[/attachment:13908riw]

yeah replaced bearings at same time nut is 30mm or 32mm i think you may need to have the wheel alligned after tho :( OR i have in the past marked around parts so you can get them in exactly the same place when you do them all up again ie strut to hub & balljoint to wishbone

i had to undo to bolts holding the ball joint to the end of the wishbone and the whole hub to get mine off in the end i thought i was gonna damage something aswell :( got it out ok once in a vice tho at least it gave me a chance to clean it all up and paint it all :D

abs rings are attached to hub not driveshaft :D

i followed this its a right pain. :( http://wiki.the-corrado.net/ignition_switch_replacement.html as mentioned above prob worth trying the switch before installing to car to check it solves the problem

seems strange if it just disapeared?? some one must no what relay should be there would look on my g60 but prob different to 16v free bump

viewtopic.php?f=17&t=91409 :D

loving the wheels :D what size tyres you running on the back? any issues?

just went out to do mine and its already done... :D does look as tho some one in the past may have had this happen, a few repairs to other wires near by

radsupport.gif[/attachment:bk4jy63h] there you go this should help

i thought this when i first saw mine rusting away... the part the rad sits on is actually seperate to the crossmember the mount sits on. you can replace this part on its own but there are different ones for G60 VR6 etc i got a 16v one and had to trim a bit off a bit iirc ill post a pic for you if i can find one :D stu

ill check the condition of the one ive got and post a picture for you :D

not sure but ive got both sides of a corrado in my shed still.. what side and part are you after???

well solved the problem today....when you pushed the pedal it seemed to catch something halfway thro, only if you pushed clutch lightly but not if you push it hard well..... during fitment of the gearbox i put in a 13mm bolt to hold the clutch release lever in place. i did remove the bolt but thought ide just leave it in a few turns till i could find a shorter one.....and then forgot about it. not a huge problem untill the inch long bolt manages to do itself up nearly all the way!?!?!?!?............ just catching the clutch release lever. so happy it was 5 min fix and dont have to have the gearbox off again gave me chance to give it a clean....http://the-corrado.net/.archive/forum/viewtopic.php?f=11&t=66097 still feel bit of a twat tho.......

nice pics mark allways nice to see another white c ......is the best colour after all :clap: :clap: quick update fitted original rear lights and got another set to tint red...stuck on rear badges...and a good clean... just front grille and splitter to get round to...climatronic wiring-Golf from May 01.pdfImage030.jpg[/attachment:bbnadjxq] [ATTACH=CONFIG]83621[/ATTACH]

received my 3 and very impressed for the money :D

been searching around and it has been suggested that i should have fitted a vr6 clutch but can find little info on this :( anyone know anything about this :confused4: :confused4: :confused4:

anyone??

well about 500miles ago i fitted a CHA passat gearbox, new clutch, pressure plate, bearing and all has been fine :D ..........untill tonight it suddenly started slipping like mad only just managed to get home at about 1500rpm it did just about work :( i suddenly thought have i fitted the wrong clutch i put on a G60 one????? what should it be if i was wrong??? thanks for any replys.... Stu

waiting for mine to arrive :D gonna put them in one of my banger cars next time i race and go on a rampage, that'll give you some cool footage and give them a good test :D

dishwasher worked well for me :D then left them in dads greenhouse to get out the last bit of water left in them out

phoning about this morning what spec should it be?? what do you recommend? got £65 :D

had a quick look and its not attached under petrol flap, must be on the tank which is allready gone. would take a pic but mis placed my camera :(

ive got a rear 1/4 in my garage complete ill have a look for you, gotta be easier with out the rest of the car in the way LOL :D