dragon green

I'm sure Vince at Stealth has fixed them before !

I'm doing 500 miles a week in my C, Can't remember the last time I saw another one !

Have you pulled the plug from the rear ? IIRC they come out side ways,I've had mine in and out many,many times,never had a problem

I wish you luck in the sales, Having looked around them,in my opinion they are worth what your asking,if not more !

Good, At least we will still see you about

Have you still got the valver ?

Yep,pop your bonnet,any of the twin lead plugs will fit !

I don't know where the pic of bulb holder came from ! Here's the real one

Prepare to kick yourself ! Bulb holder Two pin plug Together ! Get yourself down the breakers,and help yourself to some plugs of a mk2/3 golf Either leave the wires long,or you can buy new terminals,the plug in the pic is from the outside temp ! Good luck

I've got a black late shell,no switches,nothing but the dash,in good condition,no marks,holes etc,free if you pick it up,(I'm in Kent)

Lol, Good try ! I have one spare set of markers,just in case !! They do come up on American eBay time to time

I got this from my local motor factors

You can see in the pic,the front piece is just big enough to take the spring clip,while the rear has to be big enough to take the "speed clip" but not to long it hits the lamp holder

I made a template out of a cereal box,(I wanted both sides in the same spot)the hole in the template was just big enough to take the side light.Lots of masking tape,and I drew the hole to be cut.Drill then jigsaw,finished of the edge by hand with a file. I took the offcut,cut in half,I then araldited this in the hole(one at each end) this way I use the factory fittings with the light,as the bumper is fairly thick,the light sits fairly flush ! I didn't use the wires from the side indicator in the wing,(too lazy to take out the wheel arch lining)i "piggybacked" the wires from the front indicators.I ran it a while with the wing indicators for a while,but they came off when the car was re-sprayed. I'm back to work tomorrow,but as soon as I get some daylight,I'll drop one of the bumper indicators out and show you what I mean,I've still got the templates as well.I looked at many pics of the USA bumper,before I finally got round to cutting mine

If your careful,you can cut them in,(with a recess) without even marking the paint ! It took me an afternoon to do both of mine,including wiring. I was that lazy,I didn't even take the bumper off [ATTACH]80376[/ATTACH] I tinted mine with Lamin-x

I will be tonight,

[ATTACH]80370[/ATTACH]

Were you wearing your glittery suit while you typed the heading ? Welcome back

Nnooooooooooooooo

X2

I had a bag I bought from Frost automotive,it was good when new,the rad trick worked a while,but in the end it just gave up working

They are all the same size,I've got a Valeo in mine which I got from the dealers

Pics show ok for me http://the-corrado.net/showthread.php?t=45452

[ATTACH]80334[/ATTACH] Fitted

You have to do a small amount of grinding,and I do mean small on the wiper motor bracket [ATTACH]80332[/ATTACH] They do look sexy when fitted [ATTACH]80333[/ATTACH] My raintray is Kevlar/carbonfibre but it shows what it would look like