Dox
-
Content Count
5,281 -
Joined
-
Last visited
-
Days Won
21
Everything posted by Dox
-
ny57
-
You could re drill 288mm to 4 x 100? MK3 VR6 288mm and MK4 288mm disks have different offsets, you'd need to dry fit with pads before drilling. Fiat coupe non turbo 284mm disks are 4 x 100 but need the centre bore opening out to fit VAG hubs and are the correct offset for the 288mm calipers.
-
Looks like you have 288mm brakes and 280mm disks? If so the pad will over hang the disk and in some cases the disk will over heat and the pedal will go to the floor when used in anger
-
I did my mk2 with threaded bar and a piece of 4 inch steam pipe (slightly crushed) too, tensioned followed by a tap with a hammer and repeat x lots. I cleaned out the orifaces and lubed the bushes too to help them home. If the axle is off the car a normal hydraulic press should do the job also?
-
Gsf56
-
Bbbbbbbbbbbbbbaaaaaaaaaaaaahhhhhhhhhhhhhhhh!
-
http://www.newvwkeys.co.uk/ May be of help? https://www.facebook.com/VWKeyMan/
-
Its not sold until he's holding the money and the car has gone. The number of idiot bidders (note, not buyers) on ebay is only exceeded by idiot sellers arranging bids on their own items.........
-
xmas57
-
The difference is subtle, its just the arch is wider on the wing by 10mm
-
Your storm will need a late wide arched wing
-
http://the-corrado.net/showthread.php?96207-Do-you-want-to-run-a-club-or-get-involved-in-running-a-club Maybe the above goes someway to explain delays? Busy man by the sounds of it
-
We stayed in Rye earlier this year and there was a G60 on the market car park?
-
wkd55
-
http://clubgti.com/showthread.php?285724-Toyotec-s-debunking-the-myth-about-12v-VR6-MLS-and-fibre-AAA-and-AMY-head-gaskets&highlight=toyotech+vr6+myths Not sure if the charts in this thread are any help?
-
https://store.034motorsport.com/throttle-body-adapter-obd1-vr6-to-obd2-vr6-tb.html
-
Dec55
-
GSF60 Today only! Just in case you were sleeping last weekend
-
You need to quote the part number to be sure of getting a similar unit as the connector plugs differ depending on part number and won’t fit your loom.
-
Wossner, J E and Wiseco have all made oversize pistons in the past. I think I’ve read that the weights can differ between brands?
-
Blackfriday gets 60% off
-
Today’s budget speech Sent from my iPhone using Tapatalk
-
I use the tapatalk app on my iPhone and its easy, I don't use it to browse though as I find it awkward
-
https://www.demon-tweeks.co.uk/tools-workshop/brake-clutch-tools/sealey-brake-clutch-bleeder-vacuum-type-1ltr-vs020 https://www.demon-tweeks.co.uk/search/vs1663 Treated myself
-
Demon tweeks, by 3 Toyos and get a fourth free