Jump to content

g0ldf1ng3r

Moderators
  • Content Count

    4,926
  • Joined

  • Last visited

  • Days Won

    11

Everything posted by g0ldf1ng3r

  1. quick update 9 out of 10 deposits received & loom maker is ordering the parts for all 10 hopefully, work commitments the only caveat, he is aiming to have them ready by end of Nov 🙂
  2. everyone is in except 3 people now PM's sent out to those pending
  3. sorry - i hadnt checked the thread thank you
  4. chase emails & texts sent to those pending
  5. blimey, now thats a user name ive not seen for a while! did you keep track of your old green one? ended in PPP IIRC
  6. quick note to say i have sent emails out to all those with deposit pending hopefully we can get them all in & get it to production asap
  7. thanks to those who have sent deposits i will send emails out to those pending as they may not have logged on recently
  8. list update: philipc - PM received oneohtwo - PM received jared_nomak - PM received chrisL - PM received gixervr6 - PM received ratharrison - PM received nick cagelondon - PM received monkeyman - PM received andyzplace - PM received jjthompson - PM received tallpaul1977 - PM received joehunter - PM sent 30/07/24 mark.mccourt - PM sent 30/07/24 [email protected] - PM sent 30/07/24 ok everyone - still nothing from the 3 pending so im going to close the buy today (weds) ive had an email from the maker & have just replied. hopefully if everyone can be prompt with their deposits they could be ready Nov (work commitments popping up are the only caveat) deposits are £35 which he has said would be refundable if any issues occur if you could pls send them to [email protected] & put a ref of Loom & your name i will send him the list of contact info so as he can cross reference the payments i'll give it till friday &then drop emails out in case people havent logged on to here
  9. list update: philipc - PM received oneohtwo - PM received jared_nomak - PM received chrisL - PM received gixervr6 - PM received ratharrison - PM received nick cagelondon - PM received monkeyman - PM received andyzplace - PM received jjthompson - PM received tallpaul1977 - PM received joehunter - PM sent 30/07/24 mark.mccourt - PM sent 30/07/24 [email protected] - PM sent 30/07/24
  10. afternoon all 2 new requests this have been received but still nothing from the outstanding 3 i will give it till friday & then close this buy off & get it moving the maker is primed ready to order the connectors, he has most of the other parts already, once he has received all of the deposits. i will mail him after this post to let him know the latest thanks to all for patience, i understand getting these group buys to a point of go ahead can take some time just to let everyone know that the maker only covers his costs & a little time & as for myself, i just do it to help fellow owners out to see in the dark really lol
  11. received, replied & added to the list sir
  12. ok everyone update time still no replies from the 3 outstanding, i will give them 1 more chance & then im going to shit the group buy & will be proceeding as per last group buy a deposit will secure your loom & then once ready the balance will be asked for total price is £90 posted with a £35 deposit i will leave it a few days for people to see this post & then drop PM's out to everyone 🙂
  13. few more replies so... list update: philipc - PM received oneohtwo - PM received jared_nomak - PM received chrisL - PM received gixervr6 - PM received ratharrison - PM received mark.mccourt - PM sent 30/07/24 [email protected] - PM sent 30/07/24 nick cagelondon - PM received monkeyman - PM received andyzplace - PM received joehunter - PM sent 30/07/24 johnpmc22 - no longer required as his VR6 has one as of today there are 12 requests in total & just 3 outstanding replies with contact info
  14. ok - i have updated the list & have also put a record of me sending a PM to request details i will check back again soon & see what the latest is some good news to end, potentially, when i looked today the OE connector site shows them as back in stock - hopefully they have live stock on the site
  15. had a couple more PM's - thanks to those who did 5 contact details recorded so far & one new request - gives us the below: list update: philipc - PM received oneohtwo jared_nomak chrisL gixervr6 - PM received ratharrison - PM received johnpmc22 mark.mccourt [email protected] nick cagelondon - PM received monkeyman - PM received andyzplace - PM received
  16. hello again ok, ive spoken to the maker - he is in Dubai working for the next couple of weeks & is happy to crack on with the looms once back could everyone who has stated their interest pls send me a PM with your name, address, personal email & phone number this will make it much easier for me to track responses & keep things moving once ive had a PM i will email from my personal account 🙂 i will check back in a few days & if not many replies to this post i will send out messages on here thanks all
  17. hi all - apologies for this going quiet. life is very hectic & a change of job means im not on my laptop all day any longer i am trying to be more active on here though i have emailed the maker again today, i will update once i have a reply i have also checked the OE connector supplier & dont think they have a minimum quantity order - ive sent the link to the maker also, i have updated the list with the 2 below, which puts us a 12 looms requested monkeyman joehunter Pls do let me know if anyone wants adding or removing
  18. i think MB Trim in Redditch would be able to help but you may be a distance away FYI i have used them several times & Bernard who runs it is very helpful & skilled
  19. happy to report that after 14 months the VR6 is finally back home with essentially a brand new underside & nut & bolt restoration plus the Autostrada Modena's are on & looking mighty fine if i do say so myself lol pity you cant see any of the work that has just cost me a small fortune (over double what i had guessed at) but the first few journeys out have made me realise quite how much i had missed this car! the ride is sublime & the refreshed KW's feel great & the noise - nothing quite like it spent most of the weekend cleaning & resinstalling the interior, only sub & door cards left a quick pic from a gloomy drive today
  20. hi there i had similar with the Kamei eyebrow - only way to fix it down was to screw into the surrounds i guess you could try some heavy duty sticky tape of similar
×
×
  • Create New...