Swompy

I've got a part longlife/standard/magnex exhuast system on mine :D I had them fit the magnex and replace one of the silencers on mine and they dont a preaty good job. I had a slight problem and vibrating from the exhuast after lowering the car, so I contacted longlife and they sorted the vibration freeof charge :D

Ya well last week I replaced the center console so had to take it out after I put it all back together again the CD player wouldnt work and the fuse had gone. Today I had to take the CD player out again to find out why the light behind the heater dials wasnt working and when I put it back in again the same thing happend, it wouldnt work. Next time I will deisconnect the battery.

I think this is in the right place. The fuse for the radio has blowen twice on me but it only happens when I unplug the CD player to take it out. Should I be worryed or not? :confused4:

Spotted a white one :clap: It was heading towards Cinderford just befor the Dilk hospital and I came over the hump bridge going the other way so didnt get chance to see what flavour was about 4ish today. Looked lowered but other than that preaty standard. Flashed my lights and waved but no response back just a blank look :(

Wire the car battery to them :shrug: Or [youtube:2us54is5]8avOiTUcD4Y[/youtube:2us54is5]

Sounds good Andy. but...... :worthless:

Go to DG autotech you wont regret it :d They are about an hours drive away from you, straight up the M5 altho its a little treck it will be worth it. I go up there for everything and I'm only over the river from you in gloucestershire :D http://www.dgautotech.com/dgauto/

I've got a nearly new pair of budget tyres in the shed you could borrow or buy off me if needed? - Let me know Jake. Ian. Nice one Ian, I will let you know

:worthless:

That sucks dude and what a welcome to bath :( Not all of this part of the country is bad

:lol: Thought it was going to be too good to be true, £5 each and only 2 seconds down the road from me, o well :) but better to ask first insted of finding out the hard way 8)

Thought that might be the case :( pm on its way :D

Nice one And the 10th of may is my birthday :clap: 8) :lol:

I need to get some cheap rims for the car whilst it is having some work done on the rims on it now. I have found these at £5 each but they are 13" so will they fit on my car and they are just down the road from me so would be good if they can. http://cgi.ebay.co.uk/175-70-R13-4x100-Stud-13-Inch-Steel-Wheels-And-Tyres_W0QQitemZ280491017751QQcmdZViewItemQQptZUK_CarParts_Acc_Wheels_tyres_Rims_Car_Wheels_ET?hash=item414e914617 I have tryed searching but not much luck

Ya agree with the above as I done the same :epicfail:

If your not planning on using the old shock then use a pair of moles grips on the piston ( have to thread it past the coil) turn either the mole grips or the bolt on top to undo. Works best if you have two people, one to hold the mole grips other to turn the nut. Hope that helps

Sounds good vaughan, your list looks like it has half the things on it I want to do to mine 8)

As above if your fan is only working on number 4 (with the dial switches/ late style) it might be worth checking you have the right dial in the right place. Sound simple but one of them has two notches cut out of it for the copper conections. Will get some pics up in a bit to show you what I mean.

Thanks guys. Ya will hopefully be getting them polished soon 8) Will be laquering them as well

Have done a few changes over the weekend. Adjusted the throttle cable, new smoked repeaters thanks to CazzaVR, lowered the rear suspension more so it sits more evenly and replcaed the center console face as mine was broken in two :shock: Pics below :D Inside of the car half way through Final results The broken console Gave the car a quick clean as well and with only a hose and rub down it came up really nicely and the water is still beeding up from the wax. Thos 8 hours spent last weekend cleaning it have paid off :D Also after putting the console back to gether the heater fans only worked on 4 :( so after a quick fiddle with the copper conections behind the switch it was working again :clap:

Best of luck, they are barstewards :D

Any luck mate?

Be interested to hear the results of this, like many with a 2.0 16V I'm running a KR Inlet and 9A exhaust cam - Good luck!! Ian. Ya would be good to know. Ian, did you notice much difference when your KR cam was put on?

Not to worry Pm on its way :D

I second that :dorky: