20vtvw 0 Posted January 27, 2011 i fitted all new poly bushes,top mounts ,coilovers,drop links ect.but when taking off the rear axle i snapped a couple of hard brake lines :( so ordered a nickle pipe set to make all new ones :D (now rado is sat at works farm unusable) :( Quote Share this post Link to post Share on other sites
Andy-H 0 Posted January 28, 2011 As requested, pics of flocked dash in and scooby seats fitted :salute: Quote Share this post Link to post Share on other sites
mjcp 0 Posted January 28, 2011 Today I have fitted... New Dizzy cap, arm, leads and plugs... mjcp Quote Share this post Link to post Share on other sites
iceviolet 0 Posted January 28, 2011 Fitted origninal wheels back on my vr. Fresh powdercoated speedlines!! Quote Share this post Link to post Share on other sites
emu 0 Posted January 28, 2011 started it 1st time since November. started first time :) Quote Share this post Link to post Share on other sites
VR6Pete 0 Posted January 28, 2011 Started fitting the new earth strap for the bonnet. The nut on the bonnet is well and truely stuck so covered in wd40 over night! Quote Share this post Link to post Share on other sites
cannon2516 0 Posted January 28, 2011 !st time on this thread, i have just fitted some merc wheels, need a 20mm adapter to get the 112 to 100 pcd. they look really good, fitting some coilovers tommorow Quote Share this post Link to post Share on other sites
Big Adam 0 Posted January 29, 2011 Started fabricating a downpipe.......turbo power only a few sleeps away Quote Share this post Link to post Share on other sites
coolrado 0 Posted January 29, 2011 As requested, pics of flocked dash in and scooby seats fitted :salute: Do you find it hard to resist stroking the dash? lol Quote Share this post Link to post Share on other sites
mjcp 0 Posted January 29, 2011 I didn't fit new brake pads... they were less than 1/2 used... I did replace the heater thermal fuse though... Marc Quote Share this post Link to post Share on other sites
rado mc 0 Posted January 29, 2011 I opened the garage, looked at it sadly sat there gathering dust, gave it a pat, sighed and closed the door again as I have done for some time :salute: Quote Share this post Link to post Share on other sites
Jon_vr6 1 Posted January 29, 2011 Spoiler gremlins all day narrowed down to two possible faults, i will get there it wont beat me :D Quote Share this post Link to post Share on other sites
andy 0 Posted January 29, 2011 Took my door apart, cleaned and greased handles, locks, window runner ,fitted new window rollers too. The door handles have never felt this good in 6 years of ownership! I assumed they were sh4gged! Well worth it! Quote Share this post Link to post Share on other sites
VWVW 1 Posted January 29, 2011 Not driven the car for 2 weeks..recharged battery and took car out for a chill out drive :D Quote Share this post Link to post Share on other sites
dickie 0 Posted January 29, 2011 busy day changed headlights back to tinted originals instead of black angel eyes my rado came with. fitted new debadged grill. fitted the headlining id covered in black alcantara. changed the wheels to bbs instead of audi winters as need to sell the winters to raise funds for respray. tomorrow is big clean day! Quote Share this post Link to post Share on other sites
lauraJ 0 Posted January 29, 2011 New tyres and 4 wheel alignment done! Oh and 200 miles of driving today lol! Quote Share this post Link to post Share on other sites
Kempy 0 Posted January 29, 2011 couldn't get the front carriers off :( Quote Share this post Link to post Share on other sites
VWVW 1 Posted January 29, 2011 couldn't get the front carriers off They are really tight !!!! I took mine to a local exhaust fitter to have them loosened then retightened just enough for me to get home to work on them. Quote Share this post Link to post Share on other sites
Jon_vr6 1 Posted January 29, 2011 couldn't get the front carriers off They are really tight !!!! I took mine to a local exhaust fitter to have them loosened then retightened just enough for me to get home to work on them. Used a big home made breaker bar when i did mine they are prone to rounding off so be careful Quote Share this post Link to post Share on other sites
Kempy 0 Posted January 29, 2011 how do you get a bar on there? Quote Share this post Link to post Share on other sites
Jon_vr6 1 Posted January 29, 2011 how do you get a bar on there? Turn the wheels to give you the angle you need Quote Share this post Link to post Share on other sites
leeeeshad 0 Posted January 29, 2011 I was going to do the rear bearings/brakes, but it's still at the bodyshop :( Quote Share this post Link to post Share on other sites
Kempy 0 Posted January 29, 2011 A mate and I also fitted my flocked dash to my silver valver Quote Share this post Link to post Share on other sites
krnau 0 Posted January 30, 2011 how do you get a bar on there? Turn the wheels to give you the angle you need that's a good point :salute: Quote Share this post Link to post Share on other sites
