Supercharged
-
Content Count
16,478 -
Joined
-
Last visited
-
Days Won
2
Everything posted by Supercharged
-
what worn front suspension rubbers look like after 135,000m
Supercharged replied to davidwort's topic in Drivetrain
Yep, complete wishbones with bushes are not that expensive from VW... -
GSF sell the filters and you'll need 6 litres of Oil... The filter is a cartidge type and is held up by a plastic cover with a 36mm hex on the bottom (so you may need a tool to remove it)
-
Corrado Spotting Archive February 2005
Supercharged replied to Roger Blassberg's topic in General Car Chat
Thats A20 Lee - see the members gallery -
ALWAYS change the fuel filter when fitting a new pump!
-
I think Stealth charge 700 for the chain job
-
Its a kind of bayonet fitting,,,
-
There is a map of the fuse layout on the plastic fuse box cover...
-
The charger and braket needs to come off then its just an 8v Golf waterpump change...
-
Hmmm - I had heard it was one hide per seat so bassally you need 4 hides plus another one or two for the door cards...
-
Moving to suppliers...
-
BPPS - My be the Brake pedal position sensor (underneath the master cyl on the servo...)
-
Prick of the week award goes to . . . . . . .
Supercharged replied to slot's topic in General Car Chat
Yeah, never trust the forecourt ones anyway.... -
Yep, makes sense...
-
Prick of the week award goes to . . . . . . .
Supercharged replied to slot's topic in General Car Chat
Bloody hell!! -
Ideally get one of the above blades and one 6X2955425 (put this on the drivers side of the Corrado)
-
Do they not come in the Kit??
-
G60 judders on pull away and always crunches third gear
Supercharged replied to g60Dazzaman's topic in Drivetrain
Who did the clutch and what make did they use, you can get unipart clutches that fit a G60 but they can't handle the power, a mate ate one up in 6k's with a fairly standard stage 4 G60... -
GPC do the halndles for £45 + VAT http://www.gpcvwaudi.com Or there is the repair kit on here or the option to fit rear passat handles and mechs if you have remote locking.
-
Not anymore Jim!
-
If you want to do that then fair enought but it basically means getting the job done twice - 3-4 hours labour including the geometry setup!
-
I had the uprated loom but you would not beleive there difference OSRAM silverstar bulbs and new lenses make! - and I already had superbright bulbs in there...
-
I reckon its been imported and re-reg'd
-
Yep, write off I think, I recently had a know with much less noticable damage than that and the bill was £1800 inc rear bumper etc...
-
Remove the ISV and CC pipes out of the way, use engine oil on the new gasket, braket bolts should be 25Nm, Cam cover bolts need to be 10Nm
-
There should be a damper/assistor type thing... Could also remove rear wiper assembly to make lighter...