Jon_vr6

Sod qualife get a Wavetrac in fella and Racelogic traction control that Vince used to sell. I can vouch for the wavetrac awesome bit of kit as for the racelogic ive only heard good things

No one else?

Result that sounds like a beast now going from the graph

Good read mate, get a drop on the alloys as you said and i think it'll look perfect

I could be in for this as will prob going from notts anyway...but it all depends on if/when the car is done

See if you can have our lees as spare and send it off to them

Sorry Kev, mine should take priority as mines a daily

Yeah i know 2.9 was pushing it a bit and i suppose its done 160K on the same block so a good innings really

What is it about Storms they must be cursed, my block on my VR is knackered beyond repair (Bored out to the oversized piston size but theres still damage to 2 of the bores) unless i go forged pistons which Stealth have advised me not to. So luckily they have a 2.8 block on the shelf that getting stripped down checked and sent to the machinist to get rebore to the oversized piston size. Bad luck these Storm models lol

Bad news on the bottom end rebuild front, the block went off to get rebored to fit the new over sized pistons. They've rebored the block but there is still some damage to the bores so if they were to bore out more only Forged pistons would fit (stealth said thats not a good idea). So a 2.8 is on the shelf so thats going off to the machinist to get bored out to the oversized pistons. Also in 2008/09 when i had the chains/head rebuilt originally done at PSI tuning they said that the head needed skimming so off it went to get skimmed etc this went down on my bill as Cost to recondition head - £265.00 Now you would think that when you get a head rebuilt that the valves would be changed aswell. Well apparently no the head is in a bit of a state really and only shows signs of the valve stem seals being replaced. So Stealth are putting new valves in aswell now.

Yeah my temp used to take forever to get up to temp with the low temp thermostat got a standard 80 deg one and all perfect again

Ive got a pair on OEM connectors any chance i can send you them to get a loom made up? Also id like if possible for it to be waterproofed in someway around the relays, some sort of housing etc is that possible obviously at cost to me? Cheers Jon

While your there mate can you pull them nice recaros out and ill come pick them up sometime? haha Like the way you just pull out the dash like its an easy job looking good though fella planning on any shows this year?

http://the-corrado.net/showthread.php?75381-Recommendations-PSI-Boost-Gauge-amp-Vent-Pod Should help and as far as im aware there is no VAC connection on the late corrados behind the cluster

He was driving like a daisy Chris yawn yawn

Nice vid mate compared it to the oulton park one and you can see how much better the car handles less bodyroll and looks a hell of a lot more planted

pmd

Couldnt tell in the picture looked grey

11, Glove box door, £5 Is it black ?

She lives in notts city centre doubt you'll know her she has a twilight violet vr6

No worries mate you had more important things to worry about

Haha...cool just wondered where they were up to cheers

Welcome mate my GF lives in Notts and drives a VR so you might see her around

:thumbleft:

Cool was it still in bits eg engine out etc? New MAF and you should be laughing by the sounds of it mate