Rob_B
-
Content Count
1,293 -
Joined
-
Days Won
1
Everything posted by Rob_B
-
should have got V3's! you will end up with them if you try them! :)
-
http://www.superpro.eu.com/Catalogue/Pr ... spx?Prom=1
-
it doesn't say it will fit a corrado in that link? http://www.awesome-gti.co.uk/product.ph ... 27&xSec=92 part no. PFR85-207 x2 for rear axle bushes
-
couple of months?! it doesn't take that long! the garage is doing the work as i have the money, and my **** company is again making redundancies, so i havn't been to see the garage in a while :( gutted mate. it will be worth it though, i promise!
-
nothing wrong with ambition :cuckoo: :)
-
couple of months?! it doesn't take that long!
-
use your original rad or get a g60 corrado one, just make the pipework fit. the qpeng will give you about 210-220bhp out of the box with the early K03. fit a later K03 and see 220-230bhp out of the box. with some mapping work (not necessary but not a bad thing) i am runnig 250bhp with a late K03 turbo. i run a Vr6 clutch with no problem (touch wood)
-
STEALTH RACING - Racelogic Traction Control Group Buy
Rob_B replied to Vince@Stealth's topic in Suppliers Forum
Yep. You need wheel speed sensors - http://www.racelogic.co.uk/?show=Tracti ... ed_Sensors They're not cheap though, set of 4 costs - £320! http://www.racelogic.co.uk/?show=Tracti ... ail_Prices MBE management is not a problem :D Ouch! If I had a sensor I might be able to source a cheaper alternative. But at that price I don't think I can justify that quite yet!my bank account has taken a real hammering on the last few months with wheels, brakes and suspension! -
STEALTH RACING - Racelogic Traction Control Group Buy
Rob_B replied to Vince@Stealth's topic in Suppliers Forum
could this be fitted to my 20vt which has no ABS? its also running MBE managment if thats a problem? -
ive got kW V3's on mine and they are fantastic. expensive but worth every penny. i was in the same boat as you and found that spending the money is the only real way to achieve a softer ride while maintaining the height
-
My mistake, thanks for correcting me. Unless you had an analogue meter or oscilloscope then you wouldn't see an earth pulse from the ecu
-
Rogue sparks flying around my lead/spark plug interface
Rob_B replied to ww-promo's topic in Engine Bay
Sounds like the lead is knackered or not pushed on enough -
The green wire is for the rev counter. The coil should be energised all the time and the dizzy should distribute the spark. Is there power across the 2 pins on the coil? There is no ignition module on a g60
-
gutted, that 16v g60 looks awesome!
-
That car is Corrado porn!
-
my local breakers had a suitable donar car in when i wanted one. just keep an eye on the various forums and watch for overpriced engines
-
Mine is the same as kevs, catches on the nearside and not the offside rear
-
your car will have the correct wiring. i went the qpeng route but got the DIY kit and built my own loom. my ARX engine with the K03s makes 247bhp and 250lb/ft torque. there is a big thread on the 20v conversion on here, have a gander. the conversion is a doddle though. not sure why everyone hasn't done it yet! :D the engine suits the car perfectly, get it done!
-
did you go to robinsons or TPS? the dealers are seriously unhelpful! the o ring should be ok as long as it didn't get nipped when you put the bracket back on
-
if you can take the pressure off the spring then it will come off easier. is it on standard suspension? if so you need to compress the spring. if its on coilovers then drop the bottom plate down. long nose pliers may help you or as you are doing with a screwdriver and hammer
-
euro car parts TPS Dealers GSF MPD to be fair any motor factor should be able to sort you out with service parts
-
bloody hell, the legend returns! corrado sunderland has some competition now for most amusing posts! :salute:
-
STEALTH RACING - Racelogic Traction Control Group Buy
Rob_B replied to Vince@Stealth's topic in Suppliers Forum
shame its not available for my 4 pot turbo -
What a horrible bloke. Great way to talk to customers. I won't buy anything from ebc again after this. I think his email address needs spamming for being a dick.
-
GSF keep those plug removal tools on the shelf normally