junkie

I take it you did press the sport button didnt you.

And you were looking at 18's yesterday??? Bit of a change :lol:

They need to be wide to look right when slammed and its not practical to drive on.

27 4 years NCB All declared Garaged Cat 1 5000 limited mileage £450 TPFT Through Adrian Flux but cant remember which 1 they used. ! word of warning with Adrian Flux, when they send out the renewal premium they dont do any leg work trying to find a cheaper quote for you, so when you receive it get them on the phone to quote you happy as they only send the renewal premium from who your insured with. They did this to me, with like for like quotes it went from 900 to 450, so literally halfed???

So do you know if the ibiza caliper will work ok on 330mm disc or would it mean a change to the leon caliper.

Yes it makes sense, when i wrote mine i was thinking the same. Whats involved in converting into 5 stud hubs, and will the 312mm leon brembo brakes fit inside, diamater wise i know they're ok but how about the back face of the wheel?

My rev speedo does it and been told from some 1 on here its the speed sensor on the gearbox but i have not replaced it yet so cant confirm, my rev needle used to do it but its fixed itself for now.

You need to tell us 1st so we can see if anybody has a donor going free.......................go on..............what is it???????? :lol:

No worries glad to try and help.

Change your topic title or start a new thread asking somebody on here to do a photochop, they will know what you mean, to put those wheels onto your car. But you need to post up a picture of your car sideways on and a suitably sized picture of the wheel you want on. like this http://www.the-corrado.net/.archive/forum/viewto ... =3&t=62546

Right then, as im understanding a little more on RS's i'm wondering if the centre instar can be changed to 1 that is 4 stud instead of 5 stud. Are they the same size instar just with larger diameter inners and outers to make 17" as some 16" RS's have the same 15" instar, and are they all the same number of bolts, 30/34 whatever they are?

Do as i did and ask for a photochop. Get a good pic of your car sideways on and a wheel of your choice and somebody will chop them together for you so you can see what they look like.

Never seen the wheels on a corrado but loads of people use adaptors. Not sure which you meant.

Yea just a replacement 2 piece disc for the ibiza brembos is all i need. You know who else does them? I know they cost loads around the £5-600 mark, no need to say how much if you dont wanna just a yes around that will do.

If you have the angel eye type headlights then why not put 1 of the HID kits in, cost 10 times as much as just bulbs but then your going to get 10 times better visibility i would imagine.

Nice, should be doing endo's in no time :D Can you get those in 305mm 4 x 100? How much?

Try venom motorsport for them, not sure on exact prices but £100 should be about right at a guess.

They prob wont do 1 till next springish time now if they even do 1 at all. You tell them your interested and they invite you basically. Best i did was a 14.6 at the pod with an et of 92mph i think, best et i did was 99mph but a 1/4 time of something like 15 seconds, apparently when you get it right and do a good time you will most likely be under your best et mph.

May be a daft Q Ben, are you taking it to tracks now, thought it was a full track inspired car, literally, just never seeing 1?

Just noticed, how cool does it look with 305mm Brembo's on the rear 8) 8) 8)

cheers Torsten, i know its a bit harder but you fancy chopping it from the rear 3/4 shots if poss. Currently 17's.

mk3yeti - cheers for that and a much better effort than i could ever do, only thing they're 16's and look like 19's on the front lol. Cant tell you what they are but the only other time i have seen them and quite alot is on escort cossie's :D always liked them just never knew they came in 4x100 g60greeny - its all part of a masterplan 8)

You should find the loom coming from the fuse box, down the driver side floor and across under both seats, no need to take all the carpet out just a little trim.

As above can somebody put these wheels Onto this please Tried to get the best photos with more or less the same angles hoping it will make it easier for you. Cheers Simon

Adaptors all the way.