Jump to content

Jim Bowen

Members
 View Profile  See their activity

  • Content Count

    8,960

  • Joined

  • Last visited

  • Days Won

    3

Everything posted by Jim Bowen

  1. Jim Bowen
    Either i have bought/been sold another aircon model glovebox or there is no difference between them? Anyone with a standard corrado glovebox able to measure the size of it?
  2. Jim Bowen
    Would like the centre console and ash tray if you want to sell outside of ebay
  3. Jim Bowen
    Put them in envelopes and post them through their letterbox with a polite note about littering in your garden
  4. Jim Bowen
    Glad i looked in here as my pc just crashes out when i try to go on the forum, so does my mates. Logged out of tapatalk and problem solved :D Was about to go mad again :lol:
  5. Jim Bowen
    I actually bought £4 abs sensors instead of vw ones that were £55 each. Am sure the cheaper fuel pipe is up to the job. Id be happy with that. Sent from my X10i using Tapatalk 2
  6. Jim Bowen
    damn :! I might have to order some though, would rather £104 than a corrado on fire
  7. Jim Bowen
    I also need to do mine, took a pic of them the other day Looks a bit tricky getting to the end near the bulkhead. Sent from my X10i using Tapatalk 2
  8. Jim Bowen
    Just having a read of this, and wondered what the dg fans and shroud are like? Sent from my X10i using Tapatalk 2
  9. Jim Bowen
    Nice one, just what I need, didn't think to check that Sent from my X10i using Tapatalk 2
  10. Jim Bowen
    The mesh plastic thing on passenger side of scuttle tray, rhd car incase anyone gets confused. Do I need to remove something to get it off the pins fixed to scuttle area. Looks like some clip but struggling to work it out Sent from my X10i using Tapatalk 2
  11. Jim Bowen
    Could be a cable tie or something clipping it, i know mine had a few bits nearly touching when i removed it. Especially with the aircon stuff Could be on higher speed the air is actually pushing whatever is hitting it out the way? Other than that i can only imagine it being a bearing or something up with the motor
  12. Jim Bowen
    Money sent to Jay for surround and Cazza for shelf and blower housing. What else am i going to need? Do i need a new blower to go in the housing? and also looking about the net it seems i need some long duct to connect blower housing to the heater matrix bit. Anyone have a centre console? the bit headunit and heater controls sit in?
  13. Jim Bowen
    Got all mine in bits at the moment could try and find it and grab a photo but not till tomorrow night now. Sent from my X10i using Tapatalk 2
  14. Jim Bowen
    I run the same coilovers and standard wheels and tyres and do find the ride quite firm on rough roads. I have my suspension set quite high and find the springs don't have much travel in them like that. Almost looks like going lower would give me more spring travel, I might try it next time round. Other than that I just go a bit slower on bumpy roads and try to enjoy the corners instead. Sent from my X10i using Tapatalk 2
  15. Jim Bowen
    Yes please jay. Ill do that. Shall I paypal you the money. Sent from my X10i using Tapatalk 2
  16. Jim Bowen
    Sounds good, would you be able to post those bits? Sent from my X10i using Tapatalk 2
  17. Jim Bowen
    this is what i have removed, what do i keep of it? How much for blower? and surround? Tha
  18. Jim Bowen
    I am after a centre console in black with no broken bits, if such a thing exists. Also looking for the black surround that goes in front of speedo/clocks. And the standard heater blower bits as I have removed aircon. Am not totally sure what I need there for going back to standard. Sent from my X10i using Tapatalk 2
  19. Jim Bowen
    I had a tiny hole in my rad that would only show up after a hard drive, they quite good at sealing themselves and becoming hard to spot. Sent from my X10i using Tapatalk 2
  20. Jim Bowen
    Sent my payment lastnight, got a friend to do it from his paypal so let me know if there is any confusion. Or if you need my address, only got phone internet and its making things awkward. Sent from my X10i using Tapatalk 2
  21. Jim Bowen
    My VW rad has a 5-6mm lip top and bottom that you can drill into
  22. Jim Bowen
    Will pay for second set later on this evening Sent from my X10i using Tapatalk 2
  23. Jim Bowen
    Trying to get on a pc so I can send the monies. Please save me some Sent from my X10i using Tapatalk 2
  24. Jim Bowen
    been searching for this answer today, found my old pics, thought i'd share in case it helps anyone out. pic i took when subframe was removed the same arb before being fitted. not worked it out yet though
  25. Jim Bowen

    Vr arb fitting

    Jim Bowen posted a topic in Drivetrain

    Know its been covered before but struggled to find info on phone. How does the front arb fit? Does the centre bend point down or up? Sent from my X10i using Tapatalk 2
×
×
  • Create New...