Dox
-
Content Count
5,281 -
Joined
-
Last visited
-
Days Won
21
Everything posted by Dox
-
VSR adds low down torque, no good on a high revving race car.
-
Have you paid since the forum was rebuilt earlier this year? If not you need to re-subscribe and message toby to refund the non transferable payment to the old forum (if you want to).
-
G60s had 15” steels to clear the front brakes
-
I’ll post a pic tonight after work of how mine are fitted
-
Also I’ve used mole grips to tighten the clamps up prior to fitting the bolts on other vws, just in the corner of the clamp leaving the bolt hole for the bolt
-
Put them in boiling water to soften them a little?
-
So no pressure indicates the master isn't sticking, so you have a mechanical issue with the clutch? This is assuming the clutch pedal was stuck down when you did the test and the new slave is bled up properly?
-
It doesn't matter, you're testing why the pedal is not returning, you don't need the engine running, it doesn't need to be in gear either. If the master is sticking there will be pressure created by the pressure plate in the hydraulic system. If the clutch or clutch fork is jamming there will be little pressure in the hydraulics.
-
When the pedal jams, open the nipple on the slave, if there's pressure there the master is sticking, if little seeps out there's a mechanical issue with the clutch
-
That looks like an adjustable fpr? And the filter thing sounds like an Ecotec valve? Made a sucky noise?
-
Rolling them on a flat surface should show up any distortion
-
I think you are correct, I had a Neuspeed bracket in the same place on my MK3 VR6 with a Cossie Ramair cone filter
-
But you could fake service history by putting your reprinted sticker over another in a used service history book?
-
https://www.ebay.co.uk/itm/Oz-Crono-16-Wheels/163331350468?hash=item26074e9fc4:g:sYEAAOSwxZNbWa44 I have 4 of these too, Subaru fit, smaller CB
-
https://www.facebook.com/marketplace/item/653691208703558 A bit cheaper
-
I have a set of those, I don't think the caps are correct? They owe me £20 and are Subaru fit with larger centre bore ex Forrester I believe
-
They're OK I suppose...... Not jealous, not even a little.....
-
Sent from my iPhone using Tapatalk
-
Sent from my iPhone using Tapatalk
-
https://www.facebook.com/VWRebuildStickers/ Not used them myself, the image shows a reprint of a C VR6 sticker
-
I use washing soda from Home Bargain, 90p ATM. I might phone them when this crisis is over just to see if it was OK. Perfect for rear axles, 2 days then flip it over. G60 axle is on its second day pre flip
-
Report them Click right And report them Sent from my iPhone using Tapatalk
-
2 days
-
Sent from my iPhone using Tapatalk
-
https://www.ebay.co.uk/itm/pair-of-recaro-leather-seats-retrimmed-cutom-kit-car-mx5-ford-tvr-scimitar/153903102508?_trkparms=aid%3D1110001%26algo%3DSPLICE.SIM%26ao%3D1%26asc%3D225113%26meid%3De8e438e7e89c40af98efd7b6d703182c%26pid%3D100012%26rk%3D5%26rkt%3D12%26mehot%3Dpp%26sd%3D223979253158%26itm%3D153903102508%26pmt%3D0%26noa%3D1%26pg%3D2047675&_trksid=p2047675.c100012.m1985
