Dox
-
Content Count
5,281 -
Joined
-
Last visited
-
Days Won
21
Everything posted by Dox
-
These are the sacrificial golf struts used, I’ve not wore brushed the axle yet, pics of that once done. If that’s been removed then it looks a good result? I’ve a g60 rear axle to do next Sent from my iPhone using Tapatalk
-
https://www.handh.co.uk/auction/lot/60-1994-Volkswagen-Corrado-VR6/?lot=49800&so=0&st=&sto=0&au=247&ef=&et=&ic=False&sd=0&pp=96&pn=1&g=1
-
Mine did that for a while before the slave failed completely with fluid leaking from the bell housing. Easy job to fit too Sent from my iPhone using Tapatalk
-
I use nail pincers to tighten the clips
-
I’ve rejigged the set up a little, for safety as much as anything. I’ve just been out to check it and it seems to be working Sent from my iPhone using Tapatalk
-
Not Corrado related but started experimenting with electrolysis rust removal with a golf rear axle and emptied this morning wheely bin It’s only just gone in and I’m slightly underwhelmed atm. My neighbour has been doing engine ancillaries for over a week now with good effect. Anyone else tried it? https://www.clubgti.com/forums/index.php?threads/electrolysis-everyone-should-try-this-diy.129882/ This is where we’ve had the idea from Sent from my iPhone using Tapatalk
-
How have you tested the battery?
-
I'm a bit pissed about the pressure dents from crap piled on it in the loft TBH, hopefully they'll pop out again
-
My raid was a bit like the bottom one but 3 spoke Italvolante Sent from my iPhone using Tapatalk
-
Mine was an 8V, no red writing
-
I'd hammer a bi-hex socket onto them
-
I had a Raid 3 spoke on my MK2, it had individual horn buttons on the leather covered spokes and centre. I replaced it with an Italvolante 4 spoke with leather covered spokes and centre horn push, this was a dealer option in the day. I'm not a fan of the bolts on show in the centre - it looks a bit too motorsport IMO
-
What 80's - 90s cars for sale have caught your eye recently.
Dox replied to Keyo's topic in General Car Chat
-
Bump for Jim Bowen
-
It looks like something ford used to disguise the VW connection on the Galaxy MK1 (in conjunction with a carefully placed blue oval - off a big truck!).
-
I just can't get my head around what you want to do, maybe its being locked down sending me crazy..... You started with a donkey, stretched it to a thoroughbred, but want to label it as a zebra? I've not even had a drink - for over 3 weeks. No offence meant.
-
From where I'm sitting you could grind out part of the 8 to make a 9? I'm not a fan of the look if I'm honest
-
Most use the Tapatalk app for pics
-
Spotted a blue 5 stud car near to Stapeley traffic lights near Nantwich Cheshire 7pmish tues or weds this week, the car was slightly obscured by another but the wheels looked like solitudes?
-
I ended up pressing mine out, the passenger side was stuck solid. You could try putting the nut back on to protect the thread and hammer a piece of wood against it?
-
Facebook edition?
-
Mk3 disks are 25mm thick Sent from my iPhone using Tapatalk
-
280s are 54mm Sent from my iPhone using Tapatalk
-
Angle grinder wins the day Crank pulley bolt is no longer an issue Sent from my iPhone using Tapatalk
-
Stock are also 54mm pistons, the improvement is from a larger pad area and larger diameter disk