science

Try carparts4less 12 Febi guides for £45.24 if you use code saveme75 for 7.5% off or code cp5less for £5 off if you spend £50. These guides come with the lip you have to machine off if you install aftermarket cams.

£11.40 for 12 Victor Reinz seals delivered; http://www.gsfcarparts.com/145re0010

Hi Sam, Would you take £800 collected? Cheers, Neil

OBD 1&2 Inlet Manifolds are different. Exhaust manifolds are the same. So your Lambda should fit fine! It's OBD1 right? If not you will have problems as the lambda sensors have different electrical plugs between OBD 1&2. OBD 1 plug has squarish corners. OBD 2 plug has rounded connector. I've used OBD2 lambda on my OBD1 car and just swapped the connector over. ---------- Post added at 3:26 PM ---------- Previous post was at 3:20 PM ---------- Ignore that, I miss read your first post! I thought the second hole was for another lamdba sensor for an afr gauge. From memory my plug blank was 15mm long on the the treads. How bout; M18 x 1.5 O2 Lambda Sensor Blanking Plug Bung Bolt http://bit.ly/15JlAON

I would like a set please for vr6, No emblem. If its not too late?

Yes please, is PayPal ok?

Yeah I could do with an extra set, I already have another loom. How much would the connectors be please?

I might also be interested in the connectors. How much do you want?

Sweet! Pm'd

I can only see 1 relay, is this for dipped beam only?

GSF sell both. £0.95 for Victor Reinz £1.20 for Elring

Second chance please if Cazza doesn't take it!

Is it the one in this post? http://forums.vwvortex.com/showthread.php?4572859-*HOW-TO*-Polyurethane-Exhaust-Hangers!

Hi Jim, just in the process of rebuilding the head on mine. To take the head off took 5 hours including plenty of tea breaks. For the head bolts you will need a 12mm 12 point spline (triple square bit). You will need 2 people for undoing the cam sprocket bolts (if you need to remove the cams). The head can be removed with the exhaust manifold in place, you may want to separate the downpipe? If you decide to rebuild the head, here's a list of parts I've sourced that may be useful (including postage); Ebay doctor_car Head Gasket (Metal/Steel) Vw/Ford ELRING 401.820 £25.94 jjcraceandrally Torco MPZ Engine Assembly Lube HP 5oz Tube £9.50 youwantwehave 6x VALVE GUIDES AUDI,SEAT,VW VG3505 BY BGA £29.65 cs-parts-de 12x Tappets (12 neue Hydrostössel INA für VW VR6 AAA AES ABV) £76.76 or 12x Lightweight tappets (12 leichte Hydrostössel Rennsport INA VW 2,8l 2,9l VR6 AAA ABV Turbo wie Schrick) £130.49 GSF 12x Valve Stem Seal (Victor Reinz) 145RE0010 £11.40 Rocker Cover Gasket (Premium) 110VG0120 £12.24 Carparts4less 6x Inlet valve (TRW) 308441390 £66.96 Head Bolt Set (Febi Bilstein) 300440320 £23.70

Thanks Matt, could you courier them please. Just let me know payment details, cheers. Neil

Many Thanks Richard, those bits will be a great help!

Cheers, does it have the ball end?

Hi Matt, can I take the Cat and the Starter please, may possibly need postage.

Cool if I can't get a new one by next Friday, I'll take it please. Is it definitely the one with the round ball end?! Cheers Neil

Can anyone help with with these parts, I need them for my MOT Part No. 535941297 1xManual headlight adjuster Part No. 1H0 609 721 A 1xHandbrake cable (with round end) Cheers

Hi Dave, the oil cap will fit, the coolant cap will fit a mk4 expansion tank but upside down in my fitted orientation. I don't think it will fit a corrado vr6 expansion tank at all. ---------- Post added at 12:56 AM ---------- Previous post was at 12:55 AM ---------- Show us your caps!

Cheaper from Porsche but this is a better alternative than eBay; http://www.wotmotorsport.com/Porsche_Oil_Coolant_Caps/p1556518_8034546.aspx

Needed a new coolant cap for the mk4 golf expansion tank. Seemed like a good time to inject some bling into the engine bay. From the Porsche 991; [ATTACH]72648[/ATTACH] Just need to make the coolant cap fit upside down now (will not fit the corrado expansion tank). [ATTACH]72649[/ATTACH] [ATTACH]72650[/ATTACH]

This may be worth a read; http://www.ukwhitegoods.co.uk/help/fix-it-yourself/washing-machine-washer-dryer/2693-bouncing-or-excessive-vibration.html

Yeah, it's not for me at the moment either!