jscVR6

These are available at VW Heitage: https://www.vwheritage.com/vw_act_vwclassicParts.search.htm?classicSearchText=3A2955128 Mention you're a Corrado forum member and we can set you up for forum member discount too!

Looking for a powder coaters that do nylon coatings. Most powder coaters in the area only seem to do polyester and don't do nylon. Any suggestions appreciated.

Set of Lightweight OEM INA Cam Followers VR6 Full set of 12 genuine INA lightweight OEM cam followers for VR6 050109309J / 050109305H Direct replacement for standard followers. Each lifter weighs in at just 1.7 ounces, compared to a stock lifter which weighs in at 2.2 ounces. List Date: 6/21/2015 For more info, click here to view the original listing: Set of Lightweight OEM INA Cam Followers VR6 -------------------------------------- SOLD -------------------------------------- Mobile friendly version: Set of Lightweight OEM INA Cam Followers VR6 Go Mobile: Download the free Panjo iOS app now!

PM sent for an late set please

Part number is N90184501, they should be still available from dealer. They are splined as easypops says.

Hi Wendy, I'm now the in house Corrado specialist at VW Heritage, so if there are any parts you can't source on here then ask for me at VW Heritage and i'll make sure you get forum discount. Julian

Ask for Julian

I'll double check in the morning but looks like they're available from Classic Parts till stocks run out. If you call ask for me and i'll get some ordered in for you. Julian

These are available from VW Heritage and Classic parts.. p/no N90433801 I've just started working for VW Heritage on the sales team so i'll see if we can get them added to the website and stock, as they're currently to order only.

those are 1H0 609 734 C, got some last year for my axle rebuild.

I'm interested in one of these please. PM me your payment details and i'll Paypal it to you. Many thanks, J

I'll take one of the Group buy headlight switch's please. Let me know posted cost. Many thanks

I'm coming up from the M23 so could meet you guys at the Cobham Services too.

I don't have an Aldi near me so just looked on ebay and they're £4.99 delivered! http://www.ebay.co.uk/itm/111297733014?ssPageName=STRK:MEWAX:IT&_trksid=p3984.m1423.l2649

They're available from ARZ in Germany, only place I've seen them new: http://www.arz-tuning.de/shop/product_info.php/info/p6639_Fuse-Box-Panel-Clip---VW-Corrado-Golf-II-Jetta-T4-Passat-35i.html

I'll be there in the Corrado.

You will have to drop the rear of the headlining to get to the nut securing the aerial. Loosening the nut may give you enough room to fit the new gasket over the top, but I removed it completely and refitted. It's not too difficult, just be careful with the trim and pry it off in the centre to un-stick the mastic. Then there will be enough give in the headlining to carefully pull the tabs out of the rear of the roof. Difficult to explain but you'll see once you start it. I've done mine a couple of times now without a problem. Couple of pics from when I first did mine, you can see the tabs on the headlining:

They're available on ebay: http://www.ebay.co.uk/itm/VW-Golf-Passat-Polo-GTI-Roof-Aerial-Rubber-Gasket-Seal-/400134137298?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item5d29da65d2 Not too difficult to fit, you just need pull off the trim at the back of the headlining and pull the headlining down a couple of inches and it gives you enough room to undo the aerial. If the headlining trim hasn't been removed before I believe they used a blob of mastic in the centre of the trim, the rest is just clipped up.

I'll be going again this year as it's the closest show to me and always has a great atmosphere, so please put me down for the club stand Eric. Many thanks, J

I'd definitely be up for one too.

I was seriously unimpressed last winter when I found potholes had wrecked both of my N/S BBS: Front: Rear:

VR6 no emblem for me please. Many thanks

KevinBacon is right, new parts won't necessarily fix it... I had this exact same problem immediately AFTER replacing all the rear brakes with new genuine Mk4 callipers, carriers, genuine discs and genuine pads. The new pads had a self adhesive backing and I put the noise down to this not allowing the pads any movement, so I stripped it all again and copper greased everything and it's much better. Still does it occasionally tho but no where near as loud.

Sold

Hi, yes they are suitable for Speedlines and they are totally undamaged. pm sent.