owen g60
-
Content Count
1,264 -
Joined
-
Last visited
-
Days Won
1
Everything posted by owen g60
-
Yes these will fit providing you haven't lowered too much. The width and et of the rears may cause the tyres to catch on the arches. Plus I wouldn't want to run that much stretch on the rears... I would go 205/45/16 minimum
-
Got a new MOT today after new handbrake cables and rear tyres all is good for another year.
-
I've fitted a set of h&r ultra lows. Back end will be able to come down a bit more after getting the arches rolled :). Yes it is a merc 190, it's my house mates... He has it on hydraulics!!! As for paint I'm going with the same colour, got a fair few patches that need sorting after being hit in a car park on the front end and nobody owning up.
-
New coilovers, brakes, disks, pads and bearings fitted. Off for paint at the end of next week.
-
New coilovers, brakes, disks, pads and bearings fitted. Off for paint at the end of next week.
-
Went to replace brakes, disks, bearings and suspension on all 4 corners only to find 2 split cv boots on the passengers side. Whole job on hold until the parts arrive.
-
G60 engine loom / 1.8T engine loom - No Longer Available
owen g60 replied to Dox's topic in Parts for Sale
What's the price for the g60 loom? -
There are usually a few on German eBay. A company called HRT I believe. They do various kits from just the u bend and spacer plate(don't forget the plate and sealing ring) to full rallye inter cooler kits
-
I have a tezet stainless manifold if that helps you
-
I would go with the rallye u bend as it gives the easiest routing to the fmic.
-
Much appreciated
-
Thanks for the heads up. I'll be contacting them tomorrow. Any other recommendations welcome
-
This is all I could find too. I'm hoping to find someone UK based who can repair shocks(not necessarily a h&r affiliate) Somebody on here must have had suspension refurbed before
-
I have managed to track down a cheap set of h&r ultra low coilovers. Unfortunately one of the rears has leaked most of its oil. Can anyone recommend somewhere to get it looked at?
-
You are correct, you use the stock bottom half of the air box.
-
I've got the panel filter kit fitted to mine. The cone kits use k&n filters which are to be avoided if possible. I believe Riley found some paper or fine cotton cones to use... I would check his thread for info on that.
-
Mine was just outside the entrance by the plane.
-
I have the same wheels but 205/45 tyres about 30 to 32 psi on mine too
-
I'm now confirmed as going
-
Just been talking about this with a few friends. Should be making an appearance
-
I've had these wheels fitted to my g60 previously with flat caps and had no issues
-
Check the idle switch is closing fully at idle. I had the same issue last mot, turned out the switch wasn't engaging ended up having to tweak the switch/bracket slightly to get it to work
-
The measuring is done off the 2 outer pins. SNS used to send a step by step guide on how to do it.
-
In the last few days I've been getting an error like this. Only on some threads whilst using tapatalk. Have removed and reinstalled but get the same thing.