Jump to content

W3RKD

Members
 View Profile  See their activity

  • Content Count

    3,897

  • Joined

Everything posted by W3RKD

  1. W3RKD
    about 23.68 psi of boost.
  2. W3RKD
    were the valves seating before you took the charger etc off the car ?
  3. W3RKD
    g-werks are very simular to the oem ones... the psd ones are conical and the bahn brenner ones are there own billett design
  4. W3RKD
    a g60 on a g40 block will produce around 1.6bar on a 65mm pulley and has a x-flow head as std. so yes they do flow better. but sort the head on a pg and wind them up :wink:
  5. W3RKD
    so why did you actually remove the head... you seem to of given yourselve alot of unesscery work there
  6. W3RKD

    Late Black G60

    W3RKD replied to Riley's topic in Members Gallery

    best to just walk away from it for a bit and have a good break... come back when yr refreshed
  7. W3RKD
    niel > Have you taken the car to anyone who knows about g60's for them to have a look... i would take gibber up on his offer... isnt gav "h100vw" near you too ? dont be dis hearten'd if you cant get it running right just take it to someone who can help you ...
  8. W3RKD
    looking through your thread here looks like somthing u might have dislodged... are all the earth wires connected on good ?
  9. W3RKD
    Glassware actually... corrado results.. 1st > A20lee.....and another one for......sorry i have forgotton 2nd> Jay renshaw 3rd> gareth.. OSV Pvw choice > Jay renshaw.. congratulations guys..
  10. W3RKD
    yes.... if standing from the front of the car it on the upper left hand nipple on the back of the throttle body.
  11. W3RKD
    your paint was rougher than a badgers ass today mate.... get that clay out on it.
  12. W3RKD
    Gareth keep me posted on yr passat progress mate... :lol:
  13. W3RKD

    G60 with no charger

    W3RKD replied to g-dub's topic in Engine Bay

    yes it will.... just remember to blank of the oil feed / return pipes and you will be fine also u will need a shorter belt
  14. W3RKD
    give it a tap side to side with a rubber mallet.. it will proberly have some built up corrosion around it but it will budge...with a tap
  15. W3RKD
    ring steve mate....
  16. W3RKD
    BigTartanTimmeh, I think you knew what i ment.. :ignore: I would recomend nero-zero tyres btw... :wink: if you wanted to stretch a little more here is some 195's on TT rims which work very well imho.
  17. W3RKD
    i would agree with the above and favor a 205/40/... 17" que struans next post..... "which 205/40/17 tyres should i go for.? :wink:"
  18. W3RKD
    a perfect vr6 you have there rob everything looks spot on..
  19. W3RKD
    he actually smoothed our gravel driveway with it today... :lol: and furki can i have my visa card back now please...
  20. W3RKD
    rob > your just not connected.... :wink: been all good so far apart from at fleet then the cable ties were found quite quickley :wink:
  21. W3RKD
    very very nice rob... have you polished them yet then
  22. W3RKD
    not usally...it normally lives in the pocket behind the front seat.. "as im still waiting for them brackets to arrive... :wink: :wink: "
  23. W3RKD
    it was more of a cost issue to be honest mate as i sourced a 78k engine for £350 so with all new gaskets/belts/tensioner and water pump was still less than rebuilding the original head... anyway She lives !!!!! :lol:
  24. W3RKD
    Its in mate... deliverd at 3.30 and in by 5.00 just need to pick up a new water pump in the morning and we should be back to square 1... at least i know the history of the engine now
  25. W3RKD
    your fueling / timing will need checking ... also boost will need checking you cant just fit these bits and expect massive gains the do need setting up.
×
×
  • Create New...