Jon_vr6
Members-
Content Count
4,541 -
Joined
-
Last visited
-
Days Won
2
Content Type
Profiles
Forums
Blogs
Calendar
Articles
Gallery
Downloads
Store
Everything posted by Jon_vr6
-
Sounds brill hope it brings you many happy miles of motoring
-
The BMC does make the vr sound very nice
-
what about steering rack?? mines at D&G now getting a new one put on after having knocking noises when pulling away
-
looks brill mate keep up the good work
-
And usually it makes them louder id be tempted with a sports cat, high flow and you can keep it installed come mot time
-
Right when i did mine from scratch no coolant in the system set the interior fans to hot then i filled from the top rad hose until i could see the coolant starting to rise into the expansion tank then i connected the top hose back on and continued filling from the expansion tank to the max level, i then start the car with the expansion lid off to let any air escape then when the water level starts to rise quickly put the expansion tank lid on then wait till fans come on then turn off engine, wait to cool and top up if necessary. check for leaks and jobs a goodun done it this way many times and never had a problem Hope that helps
-
top of the oil filter housing
-
Either the sensor is duff or the wiring has a break in it
-
ABS Pedal distance sensor now obsolete... Grrrrrrr
Jon_vr6 replied to Vince@Stealth's topic in Suppliers Forum
A lot of stuff is becoming obsolete mate not good times im running out of room for all the spares i have lol -
ABS Pedal distance sensor now obsolete... Grrrrrrr
Jon_vr6 replied to Vince@Stealth's topic in Suppliers Forum
Get it to D&G mate and they do a refurb job on your old pedal sensor thats if the cause is that sensor -
Blue corrado with lights on at 3.35pm :cuckoo: ish just outside cheadle village heading towards gatley crossroads with kingsway
-
roundabouts :D
-
we think it was the immobilizer, but there was also some connections at the back of the fuse box not in place. we were going to remove the immobilizer all together but as we could not get it to repeat the issue we have left it for now! everything has been fine over the week at DG strange but a good result, no cost! bonus!! :D Sweet good stuff
-
What turned out to be the problem??
-
Have you phoned PSI Tuning where the work was done, Andy should be able to give you some pointers??
-
Yeah mk2 switch works a treat previous owner replaced with the mk2 one and touch wood no problems atall
-
haha hes a southern fairy now lol have fun mate
-
Ah cheers toad
-
what memory cards are people using are micro sd the same size as a micro sdhc card and whats the difference ?? Cheers Jon
-
I would get a new one for piece of mind, but if its a simple and obvious fix i would get that done
-
Have fun :D
-
cv joints
-
Jim's Corrado - ciao to the Fiat! Hello to.. (P64)
Jon_vr6 replied to Jim's topic in Members Gallery
Hopefully its not like my problem Jim when a pad guide bolt sheared off luckily D&G heard it and found it before any harm could be done :D -
Mod it how you want mate most of my mods are ones that the car needs like the lowering which imo makes it so much better to look at and drive. Just remember its your car and as long as you dont go putting big stupid bumpers and side skirts on no ones going to mind :D
-
Haha you didnt say that there was barely a mark on your 16v :D Built to last corrados