Tigerfish

you could try the stuff motorcyclists put on the inside of their visors.

I've got my short shift stick, It has the bush on it although it is black, rather than the yellowy one in the pic in your post. Would that do for dimensions? [ATTACH=CONFIG]95235[/ATTACH]

The description on the page says it does away with the FCM (fan control module).

Is there a minimum size of the part? The bit on the sunroof runner that breaks would be handy if available.

Any update on this? I may not be the most active member, but I’m even less active due to this 😟

I can’t seem to get the pic up on the link?

Fuse box cover clips?

Black Corrado north bound M1 Leicester Forest East yesterday. Probably around 4pm. Looked very nice. Tried to wave but bearded guy wouldn’t look over, so gave up and shot off. Wasn’t in my rado unfortunately.

they look great

Same for me. Error message just says web server is down. Which it obviously isn't if it is working via a web browser. Weird.

I should be good for that date. Will confirm later [emoji106] Sent from my iPhone using Tapatalk Pro

I’ve got a supersprint one on mine, which has seemed decent enough so far. No idea on the best place to get them, but you can get them on eBay . Sent from my iPhone using Tapatalk Pro

Yeah, they do rest on them. They are like a hook shape, so should hold the card to the door.

I’m in Hampshire, and dependent on date, would be available. Cheers Sent from my iPhone using Tapatalk Pro

I had a golf switch in mine for a while and had no issues either.

Where are you located? Sent from my iPhone using Tapatalk Pro

Damn, in Wilmslow today as well, wish I'd driven up now as I'd have taken these :( Sent from my iPhone using Tapatalk Pro

this is what the early cards look like.... http://carphotos.cardomain.com/ride_images/1/2946/321/7362660003_large.jpg https://images.honestjohn.co.uk/imagecache/file/fit/730x700/media/5644760/Volkswagen%20Corrado%20(4).jpg Not sure if you could cut the door card to take the handles, but the window switch holes would still be present regardless.

No, they are completely different. these are late ones (mirror switch built in)..... http://i.ebayimg.com/images/g/DUQAAOSwgQ9V4DsE/s-l300.jpg and these are early ones (mirror switch is separate) .... https://i.ebayimg.com/images/g/22AAAOSwEK9TxT1D/s-l300.jpg

My late VR had early leather door cards when I bought it. Got late leather cards now, but the early ones meant it had two sets of window switches (one set on the later pods fitted, and ones in the door panel itself). The mirror switch was never connected up. They were ok, but they used to niggle me in the end. I switched to late cloth door cards while I waited for some leather ones to come along. Handle design is much nicer on the newer cards as well, the old handles looked very dated in comparison.

Same here, early liners on a late VR. Sent from my iPhone using Tapatalk Pro

I had a similar issue when one of my plug leads was arcing across to the edge of the manifold gasket. Bending the edge over so it was further clear of the lead cured the problem. Running the engine in the dark and looking down each plug well, meant the arcing was obvious to see (it did it on both sets of plug leads I've got) Sent from my iPhone using Tapatalk Pro

I don't live there anymore, but I do visit my parents still. Sent from my iPhone using Tapatalk Pro

Ditto above, where the green bolt is or just around it if i want to put an axle stand under the bolt. Sent from my iPhone using Tapatalk Pro

Thanks Jim, yeah she was a decent size for sure. Not quite needing to resort to eating my dead pets, prefer supermarket fodder....lol.