colinstubbs
-
Content Count
1,632 -
Joined
-
Last visited
Everything posted by colinstubbs
-
General consensus is usually you'd be better off drilling your airbox on the wing side (to avoid sucking in loads of hot air caused by engine heatsoak - which what the Stroeve kit will effectively do unless you Heatshield it properly) Look Here Also try searching "stroeve" for other links :wink:
-
Soapy water and a nail brush then rinse off with a hose for me, it was a bit sunnier then mind :wink:
-
Well bigger than a 3 foot bit of ply anyhow!!! 4 foot won't go!!!!! :lol:
-
2 1/8" is standard (2.13")
-
Got a letter from the police (UPDATE Wed 4th Feb) ....
colinstubbs replied to -Neil-'s topic in General Car Chat
Get a legit phone number and call the local fuzz or council. If it's dodgy it wants clamping down fast. Could be someone using the awareness scheme for foul play. No harm in checking.... -
It will settle in the tubes, it's best used in rads with vertical tubes. Tip for when you change rad.... Get some Waxoyl and coat your rad support member in loads of it, unless you change it................. then loads of Waxoyl!!!! :lol: :lol:
-
Switch colour service - not currently taking orders
colinstubbs replied to JMC's topic in Suppliers Forum
Go on then! £52 delivered.PM me Payment stuff etc. Ta Colin -
There are a few more coolant hoses at the front of the block low down on the drivers side going to and fro from the waterpump, as well as the rad hoses.
-
these wheels any good? need advice asap (got them)
colinstubbs replied to mistrall's topic in Exterior
nice! -
Blimey! Respect! :salute:
-
I've also seen retro fit LUPO aero-blades from Bosche at around £21 a pair neater looking than the ones on e-bay less chunky plastic housing. Only any good if you wiper arms aren't $hite mind.
-
I thought Pagid stopped doing their FR pads?
-
Trouble with silicone is that it easily peels off smooth plastic. I wasn't having a dig about the 'kit' from the Stealers, they don't do membranes anymore but will sell you plastic sheet and mastic.
-
these wheels any good? need advice asap (got them)
colinstubbs replied to mistrall's topic in Exterior
Cool! -
I wasn't having a dig mate! :lol: :wave:
-
That would do it!!!!!
-
I'd have thought they'd all be the same, the voltage is what's regulated, can't see the amperage being an issue. Awaits The Reading of the Riot Act from a leckie!!!!!!
-
Apparently if you go to VW these days all they'll sell you is a sheet of plastic you have to cut to size and a tube of mastic! :roll:
-
Heard about EBC Yellow stuff? Sound good if this is to be believedand here
-
The pressure relief valve assembly in the cap can fall apart. Check it out, someone posted recently where he took the cap off and part of it had fallen into the header tank!!!!
-
That's the Forum for you! You'll have Toad on your case in a flash..........what a thought!! :shock:
-
They're not that bad, especially considering other bits of Corrados which can REALLY be a pain in the donkey! :nono:
-
Newbie In Trouble...... Extreme Arch Rot, HELP!!
colinstubbs replied to JasonB-70's topic in Exterior
Good work mate, any photos you can bang up for the curious? -
Really must sort mine one day...............
-
HAhahahahahahahahahahahahahahahahahahahahah!!!!!!!!!!!!!!!!!