Bfstrachan

I you still have these, I would be interested - thanks! Sent from my iPad using Tapatalk

Sorry, managed to get a set from a guy breaking his. Should have given you a shout 1st... Thanks for the offer though! Sent from my iPhone using Tapatalk

Does anyone recognise this car? I have bought the 2.0 16v 9a engine from it. Was hoping to find some history about what's been done. Guy I bought it from says the head has been flowed and wondered if anyone is familiar with the car/engine :) Sent from my iPhone using Tapatalk

Looking to convert back to manual Windows. Anybody happen to have a setup? Getting a bit embarrassing having to open the door every time I go through the parking barrier or a drive through... Sent from my iPhone using Tapatalk

No sign yet. Just looking to gently progress through the engine stuff - not sure I want to quite that hard core :) Sent from my iPhone using Tapatalk

Looking at a summer project and thinking of doing the 9a bottom end conversion. Any strong ones about? Thanks! Sent from my iPhone using Tapatalk

Sorry, have managed to one sorted - thanks for the reply! Sent from my iPad using Tapatalk

Ok, the grille is the early one - it's a 1990 1.8 16v (KR). Hopefully you can make out the numbers from the photos... Thanks for your help again. Sent from my iPhone using Tapatalk

You don't happen to have one do you? Sent from my iPad using Tapatalk

Broken glass - aye manifold person :) Sent from my iPhone using Tapatalk

Need drivers side headlamp - early spec please :) Sent from my iPhone using Tapatalk

Looking for drivers headlight if you still have it? Sent from my iPhone using Tapatalk

Don't happen to have drivers headlamp for early spec? Sent from my iPhone using Tapatalk

Clutch just started to slip a little... Any advice on the best option for replacing it? Also, is there anything else worth doing as long as I'm doing the clutch? Many thanks! P.S. If anyone happens to have a clutch kit - let me know :) Sent from my iPad using Tapatalk

Sorry for the late response - away all weekend. I poured the stuff into one of those spray bottles and gave the whole linings good covering. Then left it to activate for about 15 minutes and used microfibres cloth to dab the excess off. I'm led to believe the enzyme stuff doesn't penetrate through to the headlining adhesive. Left the lining to dry out properly overnight and job done. There was one area around the sunroof I had to re-apply a couple of times due to being heavily stained, but even they came out with minimal agitation :) Sent from my iPhone using Tapatalk

Looks like a few of us scored from Andrew aka 'VEEDUBBED.' I have to agree with all the above and give further credit to his over and above approach to getting parts out to us. I had both the exhaust manifold and front down pipe and they were in lovely condition! The Italian post was something else - but that aside, very pleased. Thanks Andrew!!! Sent from my iPhone using Tapatalk

PM what you need please - thanks my friend! Sent from my iPhone using Tapatalk

Do you have a tailgate seal by any chance? Thanks. Sent from my iPhone using Tapatalk

It's an "Ashley" 4 branch. If you are want it £20 plus postage and it's yours! I can get some photos up. It's been heat wrapped in quality stuff... Sent from my iPhone using Tapatalk

You are right - it's an early 1.8 16v Sent from my iPhone using Tapatalk

Oh, can anyone illuminate me on what it does - oil temp, air temp??? Sent from my iPhone using Tapatalk

Looking for the sensor that sits on the rocker cover. It is seated in a little bracket off the front left corner and has a speed connector. See photo, but spade connector has Broken off... Sent from my iPhone using Tapatalk

Got it sorted - thanks all the same :) Sent from my iPhone using Tapatalk

Here is the stuff. I got it off eBay. Sent from my iPhone using Tapatalk

What stickers would that be then... please tell! Sent from my iPhone using Tapatalk