Jim Bowen

did you get lupo ones or audi TT ones? there is a similar thread on here about the TT ones, they are perfect

i still think any car over £10k is a rip off :lol:

ordered the NGK plugs and the beru leads just now. thanks for the help. just got to get a coilpack now too

£45 isn't bad is it?

looks like the thermostat housing, very common to crack as its made of plastic. its not too hard to change

yep, thats all i did, i got the 1st one in the wrong place and was really arse awkward getting it off again

i've never tried to open my sunroof :lol: was told it all worked fine but i don't want to break it, i saw some nasty scratches on here from sunroof problems

i reckon the suspension turrents on the car may be different on early and late corrados not sure, just a guess, can't really work out what was wrong with mine

what should they be? is all this info in the handbook :lol:

do you need to do anything to the plugs before you put them in, i sure someone said about spacing them :lol:

GSF list these ones SB90130 SPARKPLUG-F5DP0R CO VR6 AAA/ABV Engs. £6.50 SB95009 SPARKPLUG-FR8LDC CO VR6 8/91 > £2.50 quite a difference in price :lol: i think these are bosch plugs maybe?

should be the same, its just a smaller volume of air, but you want it at the same pressure

same, thats what i do

everywhere i look for plugs there seems to be two sorts listed for a vr http://www.europerformance.co.uk/pages/ ... category=1 mine is a 1995

Had a misfire for a while and am going to service the car, thinking i may as well get new plugs and leads. Which are best for a standard VR6? Plugs and leads. What size leads fit in the standard clips on the plastic covers? 7mm? is there anything i need to know when i replace these? never done it before :lol: i bought the removal tool already, do i need a feeler gauge is it

ive started having mine on all the time, so i don't feel annoyed by the people with them on if they think it looks cool, then the corrado makes it look uber cool :lol:

FINAL RESULTS 1 ANDY665 Mr Williams * 1088 2 THE MONOTONES Mr Owen 1086 3 SONIC08 Miss Elliman 1065 4 SANDMAN68 Mr Lowdell 1017 5 DAIMATT Mr Wilde 1004 6 FORCE VR6 Mr Smart 987 7 BEEP BEEP VROOOOOM! Mr Wood 928 8 MINCYS HEROES Mr Cole 921 9 TEAM SCIROCCORRADO Mr Bromley 917 10 JAZZDEVIL F1 TEAM Mr Fielder 890 11 RIGHTLINE Mr Line 884 12 FINAL STORM Mr Beddows 877 13 RAT RACING Mr Kennedy 871 14 DREAM BOAT Mr Bingham 852 15 JAY2-710VW Mr Furniss 850 16 JUNKIES Mr Watkins 823 17 CRANWORTH Mr Finlay 822 18 SHEEETSPEEEED Mr Kennedy 807 19 BEN16V Mr Pegler 781 20 THE HUB Mr McCurry 781 21 CHOCOLATE SPEEDWAY RACERS Mr Tulloch 762 Well done Andy, I was sure i was going to win until the last few races :lol: Darn you!!

got mine today, thanks

I just went to VW garage with these part numbers 8N2955408D = arm, 2no. required 8N2955425E = blade, 2no. required came to £105, expensive it seems, but worth it, such a good improvement

have you got the correct wheel bolts? good efforts so far, looks great already

pretty poor pics, the arms meet in the middle, i don't see it being a problem though

just fitted them, simple really, i not sure the bending acheived much, i was too scared to break anything, but they seem to work ok. the passenger side does catch the scuttle trim at the bottom but its such a small amount i'm going to leave it and see what happens

had all mine done the other week while getting all the calipers etc replaced. I ended up paying someone else to do it. I bought a flaring tool (nice one) but never used it, was tempted to sell it on if it would be any use to anyone

phew lol thanks

i'm glad there's cars like this representing corrados today :D looks fantastic still