CorradoVR6-Turbo

I had the same knee trembling when i found out the price! But I removed mine without damaging them,but the method they use in the bently manual is rubbish!

thats one of the pipes so which one is leaking,have you jacked it up and looked at it?

Well i have checked with ETKA and the part numbers for early to late type rear lights are the same but the front fogs i am unsure,probably between 91-92?

18"x4" ............... x2 will do both fogs and indicators mate.

you don't have to remove a wing to pull a dent out and paint,but they would need the hole car unlike a loose wing,but you could also try dent wizards etc,the might be able to get the dent out without painting,but if your paint is cracked it might be worth doing the lot. As for price i would expect to have it removed and painted for around £150 mark but be warned fresh paint on a separate panel will stick out like a sore thumb! and to do it probably you will need to flash it into the bonnet and door....more £££

yup thats the subtle tint on all of them. :)

yup ive done mine.... Subtle tint. 8)

its more about flow rather than pressure,but a standard valver fuel pumps are know to delever plenty of fuel upto 350hp mark but dont quote me on that. 20vt will be 3-3.5 bar at the rail.

Awsome work Kip,loving tyour attention to detail.. 8)

get her off!!!!! she will dent the bonnet,daft cow! :tongue:

Its not where wally but wheres Jim this week :lol:

what you need is a bench seat up front ....50's style 8)

lol

Yes they fit all the corrado models, but there is only one type available from the dealers and its the thin self adhesive " Corrado" script type at £22.69each Trade. Part No..535853813a01c

i will have two please.

low profiles are much more susceptible to curb damage or just poor tyres,just one of those things.. :(

you from the US ?

go outside,jack up one front side at a time and look at the tread while rotating the wheel,you will find the trye deformed,or has a distinctive high spot.

when the abs lights is illuminated the ABS is non fuctional. that would not cause that sort of fault.

check your tyres,looks like you have a "Bleb" on one of the fronts

I got a good kicking not to sell it so now im forced to spend more money and thrash the life out of it......its a tough life! :lol:

time will tell,but it stuck on very well,no signs of lifting at all. :shrug:

I know you do,it must be the shade of green :tongue: Well the car should be painted this month the lads say! :cheers: then its the mission to reassemble the lot,but im doing this at work in the body shop....nice and warm,lots of room to work around etc :D Ive also accumulated a selection of new parts to go back on...... New bonnet pin strikers New Bonnet centre catch New Corrado script covers New chrome door latches and striker pins. New Sekurit windscreen New windscreen seals New seals for wing mirrors New seals for door handles Various new nuts and bolts. New arieal base with seal. Also Ive bought some Lamin-x of Neil to give my headlights and fogs/indicators a subtle tint as this does suit red very well. But before i applied the tint to my indicators have uou noticed that the all the product info,number etc are raised on the plastic indicators? well i did not want to apply the tint over them to find the stick out like a sore thumb,so i ground them down,and repolished the plastic with wet and dry and i tell you what it looks great and like new as you remove all the years of road abuse. 8) As for applying the Lamin-x its real easy but heat is your friend and it stretches around corners etc so easily when using a hot air gun,well impressed with it. 8) Also it makes pitted glass look like new... 8) Later

Never heard of them but most companys like that just do advertising on fle-bay,is there no place local to you that recons gearboxes?

If you intend to keep the van then yea its worth doing and with the warranty its as you say peace of mind. :)